Want a new front for your Mitcham premises? An aluminium frame gives you slim sightlines and a hard-wearing finish in any RAL colour, proportioned to the building rather than picked from a range.
Please have keys to any meter cupboards and shutter housings to hand when we survey in Mitcham, because what sits behind them can change the drawing.

What makes aluminium shopfronts work well on Mitcham premises?
Where Mitcham premises have a deep recessed entrance, it's usually worth keeping. The angled returns add display length and shelter, and a slim frame with soffit lighting turns a dark corner into the brightest part of the front in the evening.
A narrow Mitcham unit gains from fewer parts. Under about 4m wide, we'd offset the door and use one large pane rather than a central door with two slivers of glass either side, which makes the front feel wider than it measures.
If there are storeys above the shop, the frontage should feel like the base of the building and not a sign stuck on it. Lining up mullions with the windows overhead is a small move that settles the whole elevation at Mitcham premises.
Could aluminium shopfronts in Mitcham need planning permission?
England has no permitted development route for changing a shopfront. Part 7 Class A of the General Permitted Development Order 2015 excludes creating, altering or replacing one, and it allows no alterations at all on article 2(3) land. That leaves two outcomes for aluminium shopfronts at premises in the Mitcham area: a planning application, or work that doesn't materially affect the external appearance.
For Mitcham, the usual route for planning and advert applications is through London Borough of Merton, and we confirm that when we visit.
How much should you set aside for aluminium shopfronts in Mitcham?
Allow £2,495 to £11,995 plus VAT for a typical 3 to 7 m frontage. Size and specification set most of that figure for aluminium shopfronts, and the rest depends on what the survey finds on site.
| Town | Mitcham |
|---|---|
| Area | Greater London |
| Postcode districts | CR4, SM4, SW17, SW19 |
| Planning authority | London Borough of Merton |
| Building approval | Building Regulations (Approved Documents) |
| Distance from Great Barr | About 109 miles |
| Survey | Free for new work |
Questions about aluminium shopfronts in Mitcham
What do you need before surveying a unit in Mitcham?
An address, a few photos and a rough idea of what you have in mind are enough to book the survey. If you have a lease, a landlord's specification or brand guidelines, send those too, because they shape the drawing.
What happens to my old shopfront in Mitcham?
We strip it out and take it away, and that work appears as its own line on the quotation. If part of the old front is worth keeping, such as a stallriser or decorative ironwork, say so at survey and we'll draw around it.
Will an aluminium front make my Mitcham shop warmer?
It can, though the glass matters more than the frame. A thermally broken section with double-glazed units loses less heat than single glazing, and a well-sealed door is often the change you notice most on a cold day.
What rules apply to a fire exit door through a shopfront in the Mitcham area?
It must open in the direction of escape and can't be locked against immediate use, and a dedicated fire exit can't be a sliding or revolving door. In England that comes from article 14(2) of the Regulatory Reform (Fire Safety) Order 2005, and the duty sits with the responsible person, normally the employer or whoever controls the premises for a business, otherwise the owner. An outward door can clash with section 153 of the Highways Act 1980 where it opens onto the footway, so raise it early.
Does the Equality Act apply to a shop entrance in the Mitcham area?
Yes. The Equality Act 2010 applies in England, as across Great Britain, and it requires reasonable steps to remove, alter or avoid physical features that disadvantage disabled people. The duty is anticipatory, so it looks at disabled people generally, and a new Services Code replaced the 2011 Code on 5 August 2026.