0800 088 6248 Get a guide price
  1. Home
  2. Services
  3. Illuminated signage
  4. Mitcham

Illuminated signage in Mitcham

Scale drawings for illuminated signage in Mitcham before anything is made.

After dark, your sign is the frontage. In Mitcham we would usually start with halo-lit letters, then look at face-lit or trough lighting if distance or the building calls for them.

Nothing gets ordered off the back of a survey in Mitcham, because its job is to give us the numbers to draw and price from.

Halo-lit metal letters glowing softly against a dark shop fascia in the evening

How do you design around the building when planning illuminated signage in Mitcham?

On a timber frontage, a slim trough light usually keeps more of the daytime character than lit letters. We colour-match the bar to the fascia, so it almost disappears by day.

If an old lightbox is coming down, we check the cable position and the wall behind it before designing the new sign. An existing supply can often be reused, which saves work on the inside.

Where the building has good brick or stone around the opening, set the frame back in the reveal so the masonry can be seen. On Mitcham premises with a flat elevation, that deep reveal throws a shadow line that adds real depth in low sun.

What might illuminated signage cost in Mitcham?

Until the survey is done, plan on £895 to £3,995 plus VAT per sign. Unusual sizes, fine detail and phased working push the figure up, while a simple brief and clear access keep it toward the lower end.

What permissions should you check for illuminated signage in Mitcham?

England has no permitted development route for changing a shopfront. Part 7 Class A of the General Permitted Development Order 2015 excludes creating, altering or replacing one, and it allows no alterations at all on article 2(3) land. That leaves two outcomes for illuminated signage at premises in the Mitcham area: a planning application, or work that doesn't materially affect the external appearance.

Class 4B, England's class for lit signs, isn't available in conservation areas, Areas of Outstanding Natural Beauty, National Parks or the Broads, so a lit sign there normally needs advertisement consent. In an area of special control it is unavailable too, and Class 5 drops to a 3.6m top height, 0.3m letters and one-tenth of the building face up to 3.6m. Ask the council which designations cover premises in the Mitcham area.

At survey we check how things stand for your building, although applications for planning permission or advertisement consent here normally go to London Borough of Merton.

Mitcham at a glance
TownMitcham
AreaGreater London
Postcode districtsCR4, SM4, SW17, SW19
Planning authorityLondon Borough of Merton
Building approvalBuilding Regulations (Approved Documents)
Distance from Great BarrAbout 109 miles
SurveyFree for new work

Questions about illuminated signage in Mitcham

How will I know what my Mitcham sign looks like at night?

We draw it on your elevation and describe the lighting effect in the specification, and a sample letter can be tested on your fascia where that helps. Colour temperature and output are agreed before manufacture.

What happens if a lit letter fails on my Mitcham sign?

Usually a single LED driver or a damaged connection is to blame, and it can be traced from the access point. That is why drivers are placed where they can be reached without taking the sign down.

Can you replace a lightbox on my Mitcham premises?

Yes. We take the old box down, check the wall and supply behind it, then fit the new sign. Built-up letters will often need a new panel, because the old box leaves a mark on the fascia.

What rules apply to a fire exit door through a shopfront in the Mitcham area?

It must open in the direction of escape and can't be locked against immediate use, and a dedicated fire exit can't be a sliding or revolving door. In England that comes from article 14(2) of the Regulatory Reform (Fire Safety) Order 2005, and the duty sits with the responsible person, normally the employer or whoever controls the premises for a business, otherwise the owner. An outward door can clash with section 153 of the Highways Act 1980 where it opens onto the footway, so raise it early.

Do roller shutters need planning permission in the Mitcham area?

Usually yes. Installing or replacing a security grill or shutter on a shopfront is expressly outside England's shop permitted development rights, so the only way to avoid an application is work that doesn't materially affect the appearance. Ask the council before ordering.

Planning illuminated signage in Mitcham?

Send the address and a photo, and we'll come and measure it.

Call usGet a guide price