Seen a frontage you wish was yours? Send us a photo of it, and we'll work out why it succeeds and draw something as good for your Rye premises.
A survey in Rye usually starts outside, looking at the whole elevation before any tape comes out, because the frontage has to answer the building above it.

Where should you begin with aluminium shopfronts in Rye?
If your Rye frontage faces south or west, the colour choice has a physical effect. Dark frames run hot in full sun and long runs of aluminium move, so we'd leave room for expansion at the fascia and look at solar control glass to protect stock.
A narrow Rye unit gains from fewer parts. Under about 4m wide, we'd offset the door and use one large pane rather than a central door with two slivers of glass either side, which makes the front feel wider than it measures.
If there are storeys above the shop, the frontage should feel like the base of the building and not a sign stuck on it. Lining up mullions with the windows overhead is a small move that settles the whole elevation at Rye premises.
What sign-off might you need for aluminium shopfronts in Rye?
Security grilles and shutters are named in England's rules: installing or replacing one on a shopfront sits outside the shop permitted development rights. The frontage itself is treated the same way, so for aluminium shopfronts at premises in the Rye area, building work that materially affects the appearance needs planning permission. Confirm the position with the council before anything is ordered.
Expect planning and advert applications here to go to Rother District Council in the normal way. We check what that means for your building when we survey it in Rye.
What price should you expect for aluminium shopfronts in Rye?
As a working budget, use £2,495 to £11,995 plus VAT for a typical 3 to 7 m frontage. Your place inside that range for aluminium shopfronts depends mostly on how much of the existing frontage can stay and how much has to be put right first.
| Town | Rye |
|---|---|
| Area | East Sussex |
| Postcode districts | TN31, TN36 |
| Planning authority | Rother District Council |
| Building approval | Building Regulations (Approved Documents) |
| Distance from Great Barr | About 158 miles |
| Survey | Free for new work |
Questions about aluminium shopfronts in Rye
Can a sign and shutter be fitted with the frame in Rye?
Yes, and it's usually the neater way to do it. One contract covers the frontage, so the shutter box, fascia and sign fixings are drawn together and nobody is left waiting for another trade.
Can I keep trading while my Rye shopfront is replaced?
Often, yes. The front can usually be replaced a section at a time, with temporary screens keeping the shop secure, and a closed-day or out-of-hours fit can be arranged if that suits you better.
How does pricing work for Rye premises?
Every price comes from a measure-up, never a photograph. You get an itemised written quotation that holds for 90 days, and nothing is ordered until you accept it.
What rules apply to a fire exit door through a shopfront in the Rye area?
It must open in the direction of escape and can't be locked against immediate use, and a dedicated fire exit can't be a sliding or revolving door. In England that comes from article 14(2) of the Regulatory Reform (Fire Safety) Order 2005, and the duty sits with the responsible person, normally the employer or whoever controls the premises for a business, otherwise the owner. An outward door can clash with section 153 of the Highways Act 1980 where it opens onto the footway, so raise it early.
Do I need listed building consent for a shopfront in the Rye area?
Usually yes, if the building is listed. In England the local planning authority decides, and Historic England is notified of Grade I and II* works and specified Grade II works. Like-for-like repair may not need consent, so ask the council before work starts.