0800 088 6248 Get a guide price
  1. Home
  2. Services
  3. Shopfront refurbishment
  4. Rye

Shopfront refurbishment in Rye

Sightlines, proportion and finish worked out for your Rye building.

Taking on a unit in Rye often means inheriting someone else's frontage. We work out what can stay, what can change and what it would cost.

We measure your Rye opening in person, at a time agreed with you first, so the visit fits around your trading.

Refurbished timber shopfront with fresh paint, new glass and a restored fascia on a brick parade

How would we approach shopfront refurbishment for your Rye premises?

If your Rye premises need to stay open, we split the work into short stages. One bay at a time keeps the door in use, with out-of-hours work for anything noisy.

If the glass is old, we look for the etched safety mark in the corner of each pane. Panes without one, in the door or at low level, should be replaced while the frontage is being worked on.

Where a fascia has crept down over the years, lifting it back to its original line can add real height to the glass. Check what sits behind it first at Rye premises, since a shutter box or old beam may set the limit.

What consents could affect shopfront refurbishment in Rye?

A true like-for-like replacement usually needs no planning permission in England, because the external appearance isn't materially affected. New materials, a different glass line or altered proportions usually do count as material, so for shopfront refurbishment at premises in the Rye area, an application is then likely. The council confirms which side of that line a job falls on.

Expect planning and advert applications here to go to Rother District Council in the normal way. We check what that means for your building when we survey it in Rye.

What should you budget for shopfront refurbishment in Rye?

Allow £1,995 to £8,995 plus VAT depending on what is kept. Size and specification set most of that figure for shopfront refurbishment, and the rest depends on what the survey finds on site.

Rye at a glance
TownRye
AreaEast Sussex
Postcode districtsTN31, TN36
Planning authorityRother District Council
Building approvalBuilding Regulations (Approved Documents)
Distance from Great BarrAbout 158 miles
SurveyFree for new work

Questions about shopfront refurbishment in Rye

Can a refurbishment make my Rye premises easier to enter?

Often, yes. Lighter door closers, better handles and a lower threshold can all be added without replacing the frontage. We check the door width and the step at survey.

How do I know if my Rye shopfront needs replacing?

A measured survey will show you. We check the frame, joints, door and glass, then tell you plainly whether refurbishment will last or whether a new shopfront would be better value.

Can you repair a timber shopfront in Rye?

Yes. Decayed sections are cut out and spliced with new hardwood, then primed and painted. That keeps the joinery you have, and it usually costs far less than making a new frontage.

Do roller shutters need planning permission in the Rye area?

Usually yes. Installing or replacing a security grill or shutter on a shopfront is expressly outside England's shop permitted development rights, so the only way to avoid an application is work that doesn't materially affect the appearance. Ask the council before ordering.

What rules apply to a fire exit door through a shopfront in the Rye area?

It must open in the direction of escape and can't be locked against immediate use, and a dedicated fire exit can't be a sliding or revolving door. In England that comes from article 14(2) of the Regulatory Reform (Fire Safety) Order 2005, and the duty sits with the responsible person, normally the employer or whoever controls the premises for a business, otherwise the owner. An outward door can clash with section 153 of the Highways Act 1980 where it opens onto the footway, so raise it early.

Planning shopfront refurbishment in Rye?

Send the address and a photo, and we'll come and measure it.

Call usGet a guide price