A slim framed slider can sit inside an existing Newtown frontage with little change to the outside. The drive hides behind the fascia, and the leaves line up with the screens either side.
Measuring the opening is the easy part of a survey in Newtown. We also look at the beam above, the pavement fall and any meters or drains nearby.

How do you design around the building when planning automatic sliding doors in Newtown?
In a parade in Newtown with a narrow pavement, the sensor set-up is the first job. We'd angle the radar so people walking past don't trigger the door, and keep the leaves in line with the neighbouring frontage.
A corner unit in Newtown can often move its entrance to the angle, where two directions of footfall meet. We'd look at a curved or canted door set, and check the wind on both streets before fixing the position.
If you trade after dark in Newtown, the view in matters more than the sign. A warm, evenly lit interior with light on the back wall will usually do more than a brighter fascia, because it gives the eye somewhere to go.
What might automatic sliding doors cost in Newtown?
The guide for automatic sliding doors is £3,895 to £11,995 plus VAT per entrance. Expect the lower end for simple work with clear access, and the upper end where detail, finish or awkward conditions add hours.
What permissions should you check for automatic sliding doors in Newtown?
Section 55 of the Town and Country Planning Act 1990 sets the test in Wales: work that doesn't materially affect the external appearance isn't development. Anything that does needs planning permission, and that goes for automatic sliding doors at premises in the Newtown area as much as for a full new frontage. The council confirms how the test applies to your site.
We confirm the position at survey, because a boundary or a special designation can change who handles the file, but applications from Newtown premises normally go to Powys County Council.
| Town | Newtown |
|---|---|
| Area | Powys |
| Postcode districts | SY16 |
| Planning authority | Powys County Council |
| Building approval | Building Regulations (Approved Documents for Wales) |
| Distance from Great Barr | About 58 miles |
| Survey | Free for new work |
Questions about automatic sliding doors in Newtown
What do I need to arrange for a door in Newtown?
Usually just a power supply near the head, and we'll tell you exactly what at survey. We can bring that into the one contract if you'd rather not chase an electrician.
Who installs automatic doors in Newtown?
Vetted door teams working under S&K Glazing handle the fit and set-up, travelling from Great Barr. Your agreement is with S&K Glazing Limited, and one person stays your point of call.
Will an automatic door fit my Newtown shop?
It depends on the width of the front and the depth at the head. A survey shows whether the parked leaves fit and where the operator can hide, and if a slider won't work we'd look at a powered swing door.
When does a shop sign in the Newtown area need advertisement consent?
A sign needs advertisement consent when it falls outside Class 5 or Class 4B of the 1992 Advertisement Regulations, which still apply in Wales. Within Class 5, an unlit sign sits on a wall containing a shop window and tops out at 4.6m or the first-floor sill if lower. A lit sign in a conservation area needs consent, because Class 4B isn't available there.
Can a roller shutter go on a shop in the Newtown area without planning permission?
Usually not in Wales. Part 42 of the 1995 Order, as inserted in 2014, excludes installing or replacing a security grill or shutter on a shopfront, so the rights for shops don't help. The only way to avoid an application is work that doesn't materially affect the appearance, and the council confirms that.