0800 088 6248 Get a guide price
  1. Home
  2. Services
  3. Automatic sliding doors
  4. Oswestry

Automatic sliding doors in Oswestry

Survey, drawings and a written price for automatic sliding doors in Oswestry.

A slim framed slider can sit inside an existing Oswestry frontage with little change to the outside. The drive hides behind the fascia, and the leaves line up with the screens either side.

A survey in Oswestry usually starts outside, looking at the whole elevation before any tape comes out, because the frontage has to answer the building above it.

Bi-parting automatic sliding glass doors in a slim aluminium frame at a shop entrance

What makes automatic sliding doors work well on Oswestry premises?

On a narrow Oswestry frontage, parked leaves can leave too little opening. We'd look at a telescopic or single-slide set, and consider moving the door to one side to free up the display.

A deep recess is a gift for an automatic door. At Oswestry premises with one, we'd set the door back from the street so the sensors see less of the pavement and the leaves get some shelter from the wind.

A corner unit has two fronts to think about, and the return elevation often does as much selling as the main one. If that is your layout in Oswestry, carry the fascia and glass line round the corner and treat both faces as one composition.

How much should you set aside for automatic sliding doors in Oswestry?

We would budget £3,895 to £11,995 plus VAT per entrance. Scope sets most of the figure, so a clear brief at the start does more for the budget than any later change of detail.

Could automatic sliding doors in Oswestry need planning permission?

England has no permitted development route for changing a shopfront. Part 7 Class A of the General Permitted Development Order 2015 excludes creating, altering or replacing one, and it allows no alterations at all on article 2(3) land. That leaves two outcomes for automatic sliding doors at premises in the Oswestry area: a planning application, or work that doesn't materially affect the external appearance.

For Oswestry, the usual route for planning and advert applications is through Shropshire Council, and we confirm that when we visit.

Oswestry at a glance
TownOswestry
AreaShropshire
Postcode districtsSY11
Planning authorityShropshire Council
Building approvalBuilding Regulations (Approved Documents)
Distance from Great BarrAbout 52 miles
SurveyFree for new work

Does Shropshire Council publish shopfront guidance?

Yes, Oswestry Shopfront Design Guide: Standing Pre-Application Advice Note (2025). It covers Oswestry only, so it doesn't apply across the whole council area. A few of the things it asks for:

  • In Oswestry, the optimum stallriser height is 300mm to 700mm, in hardwearing materials such as brick, glazed tile or stone.
  • Fascia boards should not exceed 380mm unless there is historic precedent, and new boards should not go over existing ones.
  • Removable mesh grilles and external or solid roller shutters are not appropriate in the conservation area and strongly discouraged elsewhere.

Read our summary of the Shropshire guidance

Questions about automatic sliding doors in Oswestry

Will an automatic door fit my Oswestry shop?

It depends on the width of the front and the depth at the head. A survey shows whether the parked leaves fit and where the operator can hide, and if a slider won't work we'd look at a powered swing door.

How noisy would an automatic door be at my Oswestry shop?

A healthy door is very quiet, and you'd normally hear only a soft hum. Noise usually means worn rollers or grit in the guide, which a service will put right.

What do I need to arrange for a door in Oswestry?

Usually just a power supply near the head, and we'll tell you exactly what at survey. We can bring that into the one contract if you'd rather not chase an electrician.

Do I need planning permission to change a shopfront in the Oswestry area?

Usually yes, if the work materially affects the building's external appearance. England's shop permitted development rights exclude creating, altering or replacing a shopfront, so there is no shortcut. A true like-for-like replacement usually needs no application, and the council confirms the position.

Do roller shutters need planning permission in the Oswestry area?

Usually yes. Installing or replacing a security grill or shutter on a shopfront is expressly outside England's shop permitted development rights, so the only way to avoid an application is work that doesn't materially affect the appearance. Ask the council before ordering.

Planning automatic sliding doors in Oswestry?

Send the address and a photo, and we'll come and measure it.

Call usGet a guide price