From a single-bay stair tower to a full frontage, we design and fit curtain walling for premises in Oswestry and the surrounding parts of Shropshire. One contract covers the frame, the glass and the junction with the shopfront below.
Nothing gets ordered off the back of a survey in Oswestry, because its job is to give us the numbers to draw and price from.

Where should you begin with curtain walling in Oswestry?
If the ground floor of your Oswestry premises is a shop, we carry the curtain wall grid down into the shopfront below. Door heads, fascia line and transoms then line up by design.
If your Oswestry premises have a concrete frame, we open up a sample of slab edges at survey and plan brackets around what is really there. Steel frames and older masonry piers each need a different fixing, so nothing is priced from assumptions.
If there are storeys above the shop, the frontage should feel like the base of the building and not a sign stuck on it. Lining up mullions with the windows overhead is a small move that settles the whole elevation at Oswestry premises.
What sign-off might you need for curtain walling in Oswestry?
England has no permitted development route for changing a shopfront. Part 7 Class A of the General Permitted Development Order 2015 excludes creating, altering or replacing one, and it allows no alterations at all on article 2(3) land. That leaves two outcomes for curtain walling at premises in the Oswestry area: a planning application, or work that doesn't materially affect the external appearance.
At survey we check how things stand for your building, although applications for planning permission or advertisement consent here normally go to Shropshire Council.
What price should you expect for curtain walling in Oswestry?
The guide for curtain walling is £550 to £1,250 plus VAT per m². Expect the lower end for simple work with clear access, and the upper end where detail, finish or awkward conditions add hours.
| Town | Oswestry |
|---|---|
| Area | Shropshire |
| Postcode districts | SY11 |
| Planning authority | Shropshire Council |
| Building approval | Building Regulations (Approved Documents) |
| Distance from Great Barr | About 52 miles |
| Survey | Free for new work |
Does Shropshire Council publish shopfront guidance?
Yes, Oswestry Shopfront Design Guide: Standing Pre-Application Advice Note (2025). It covers Oswestry only, so it doesn't apply across the whole council area. A few of the things it asks for:
- In Oswestry, the optimum stallriser height is 300mm to 700mm, in hardwearing materials such as brick, glazed tile or stone.
- Fascia boards should not exceed 380mm unless there is historic precedent, and new boards should not go over existing ones.
- Removable mesh grilles and external or solid roller shutters are not appropriate in the conservation area and strongly discouraged elsewhere.
Questions about curtain walling in Oswestry
Is curtain walling right for a single-storey unit in Oswestry?
Usually not. A well-designed aluminium shopfront will span most single-storey openings with slimmer sections and lower cost. Curtain walling starts to make sense once the glass runs past a floor edge or the opening is unusually tall.
How disruptive is curtain walling for neighbours in Oswestry?
Most disruption comes from access equipment and deliveries, not from noisy work. We plan unloading and any scaffold around nearby premises, and we keep the working area screened and tidy at the end of each shift.
What should I send before a survey of my Oswestry premises?
The address, a few photographs and any existing drawings are enough to start. Tell us how the building is used and which floors stay occupied, because that shapes the access plan.
Do roller shutters need planning permission in the Oswestry area?
Usually yes. Installing or replacing a security grill or shutter on a shopfront is expressly outside England's shop permitted development rights, so the only way to avoid an application is work that doesn't materially affect the appearance. Ask the council before ordering.
Does a shop sign in the Oswestry area need advertisement consent?
Not always. In England, an unlit sign within Class 5 of the 2007 Advertisement Regulations generally needs no application, and neither does a lit sign within Class 4B. Anything outside those classes needs consent, and Class 4B isn't available in conservation areas, so check before ordering.