Curtain walling gives Arbroath premises a glazed elevation that runs past the floor edges, where a standard shopfront frame would run out of span. We measure the structure first, then set the grid out to suit the building.
Expect us to measure the opening, photograph the existing front and check how materials will reach it on the day, at a time you have agreed.

How would we approach curtain walling for your Arbroath premises?
If your Arbroath premises have a concrete frame, we open up a sample of slab edges at survey and plan brackets around what is really there. Steel frames and older masonry piers each need a different fixing, so nothing is priced from assumptions.
Unloading is worth thinking through early on any Arbroath site with restricted access. Mullions can run to 6m or more, so we look at lifting routes, storage and where a delivery can stop.
Where the footway outside your Arbroath premises is narrow, a recessed entrance earns its keep. It gives people a dry place to pause out of the walkway, and it adds a longer run of display glass either side of the door.
What consents could affect curtain walling in Arbroath?
Section 26 of the Town and Country Planning (Scotland) Act 1997 sets the test: work that doesn't materially affect the external appearance isn't development. For curtain walling at premises in the Arbroath area, anything that does needs planning permission, and a true like-for-like replacement usually doesn't. The council confirms how that applies to each site.
Expect planning and advert applications here to go to Angus Council in the normal way. We check what that means for your building when we survey it in Arbroath.
What should you budget for curtain walling in Arbroath?
We would budget £550 to £1,250 plus VAT per m². Scope sets most of the figure, so a clear brief at the start does more for the budget than any later change of detail.
| Town | Arbroath |
|---|---|
| Area | Angus and Dundee |
| Postcode districts | DD11 |
| Planning authority | Angus Council |
| Building approval | Building warrant (Technical Handbook) |
| Distance from Great Barr | About 279 miles |
| Survey | Free for new work |
Questions about curtain walling in Arbroath
Will you coordinate with my architect or main contractor in Arbroath?
Yes. We can work to their drawings and programme, and we supply shop drawings for their review before anything is made. Your named contact stays the single route for questions on our package.
Is curtain walling right for a single-storey unit in Arbroath?
Usually not. A well-designed aluminium shopfront will span most single-storey openings with slimmer sections and lower cost. Curtain walling starts to make sense once the glass runs past a floor edge or the opening is unusually tall.
What should I send before a survey of my Arbroath premises?
The address, a few photographs and any existing drawings are enough to start. Tell us how the building is used and which floors stay occupied, because that shapes the access plan.
Which way must a fire exit door open on a shop in the Arbroath area?
In the direction of escape. Regulation 13(2) of the Fire Safety (Scotland) Regulations 2006 also rules out sliding and revolving doors on a dedicated fire exit and says fire exit doors can't be locked against immediate use. Duties sit with dutyholders under Part 3 of the Fire (Scotland) Act 2005, meaning the employer and any person with control of the premises.
Do I need planning permission to alter a shopfront in the Arbroath area?
Usually yes, if the work materially affects the external appearance. Class 9A, Scotland's shop permitted development right, doesn't cover work that alters or extends beyond the existing front. A true like-for-like replacement usually needs no permission, and the council confirms the position.