From a single-bay stair tower to a full frontage, we design and fit curtain walling for premises in Dundee and the surrounding parts of Angus and Dundee. One contract covers the frame, the glass and the junction with the shopfront below.
Measuring the opening is the easy part of a survey in Dundee. We also look at the beam above, the pavement fall and any meters or drains nearby.

How do you design around the building when planning curtain walling in Dundee?
If the ground floor of your Dundee premises is a shop, we carry the curtain wall grid down into the shopfront below. Door heads, fascia line and transoms then line up by design.
Where your frontage in Dundee faces open ground, wind load can push mullions a size deeper than a sheltered terrace would need. We check exposure for your elevation, so the sections are no heavier than they have to be.
If the pavement falls across your frontage, let the stallriser take up the slope and keep the glass line dead level. The eye reads the long horizontal, so Dundee premises on a slope look settled once that line is true.
What might curtain walling cost in Dundee?
Until the survey is done, plan on £550 to £1,250 plus VAT per m². Unusual sizes, fine detail and phased working push the figure up, while a simple brief and clear access keep it toward the lower end.
What permissions should you check for curtain walling in Dundee?
Class 9A, Scotland's shop permitted development right, gives no route for a shopfront change. It covers Class 1A premises, but not work that alters or extends beyond the existing front, and it doesn't apply in conservation areas, National Parks or World Heritage Sites. For curtain walling at premises in the Dundee area, that generally means a planning application unless the external appearance isn't materially affected.
We confirm the position at survey, because a boundary or a special designation can change who handles the file, but applications from Dundee premises normally go to Dundee City Council.
| Town | Dundee |
|---|---|
| Area | Angus and Dundee |
| Postcode districts | DD1, DD2, DD3, DD4 |
| Planning authority | Dundee City Council |
| Building approval | Building warrant (Technical Handbook) |
| Distance from Great Barr | About 274 miles |
| Survey | Free for new work |
Questions about curtain walling in Dundee
Will you coordinate with my architect or main contractor in Dundee?
Yes. We can work to their drawings and programme, and we supply shop drawings for their review before anything is made. Your named contact stays the single route for questions on our package.
Can part of an elevation in Dundee be done first?
Yes, provided the break falls at a sensible mullion. Phasing can spread cost and disruption, although two visits usually cost more than one. We would draw the whole elevation first so the second phase matches.
Who do I deal with during a curtain walling job in Dundee?
You have one named contact from survey to handover. The contract is with S&K Glazing Limited, and vetted teams working under S&K Glazing carry out the work.
Does a shop sign in the Dundee area need advertisement consent?
Not always. Scotland's 1984 Regulations let an unlit sign within Class IV(1) go up without an application, and Class VI does the same for a lit sign with each character lit from within. Class VI isn't available in conservation areas, and one council says lit signs always need express consent, so ask first.
Does the Equality Act cover a shop entrance in the Dundee area?
Yes. The Equality Act 2010 applies in Scotland as part of Great Britain, and its anticipatory duty expects reasonable steps to remove, alter or avoid physical features that disadvantage disabled people generally. BS 8300-2:2018 is the current British Standard for accessible buildings.