Curtain walling gives Mottingham premises a glazed elevation that runs past the floor edges, where a standard shopfront frame would run out of span. We measure the structure first, then set the grid out to suit the building.
We measure your Mottingham opening in person, at a time agreed with you first, so the visit fits around your trading.

How would we approach curtain walling for your Mottingham premises?
If the ground floor of your Mottingham premises is a shop, we carry the curtain wall grid down into the shopfront below. Door heads, fascia line and transoms then line up by design.
If the frontage joins a neighbouring building in Mottingham, we draw that junction in full at design stage. The last mullion, the flashing and the movement joint are details people notice from the pavement.
If the pavement falls across your frontage, let the stallriser take up the slope and keep the glass line dead level. The eye reads the long horizontal, so Mottingham premises on a slope look settled once that line is true.
What should you budget for curtain walling in Mottingham?
Allow £550 to £1,250 plus VAT per m². Size and specification set most of that figure for curtain walling, and the rest depends on what the survey finds on site.
What consents could affect curtain walling in Mottingham?
For curtain walling at premises in the Mottingham area, the deciding question in England is whether the building work materially affects the external appearance. If it does, planning permission is needed, while a true like-for-like replacement usually needs none. The council confirms the position for each site.
Expect planning and advert applications here to go to Royal Borough of Greenwich in the normal way. We check what that means for your building when we survey it in Mottingham.
| Town | Mottingham |
|---|---|
| Area | Greater London |
| Postcode districts | SE12, SE13, SE3, SE9 |
| Planning authority | Royal Borough of Greenwich |
| Building approval | Building Regulations (Approved Documents) |
| Distance from Great Barr | About 112 miles |
| Survey | Free for new work |
Questions about curtain walling in Mottingham
Is curtain walling right for a single-storey unit in Mottingham?
Usually not. A well-designed aluminium shopfront will span most single-storey openings with slimmer sections and lower cost. Curtain walling starts to make sense once the glass runs past a floor edge or the opening is unusually tall.
Can you match the frames already on my Mottingham building?
Usually, yes. Colour can be matched to a RAL reference or a sample, and cap profiles can be chosen to sit close to what is there. An exact match on an old system may not be possible, in which case we would suggest a deliberate change at a natural break.
Can you replace failing curtain walling on premises in Mottingham?
Yes. We survey the frame, brackets and seals first, because some elevations only need new glass and gaskets. If the frame itself has failed, we draw a replacement that can be phased around the building's use.
Does a new shopfront in the Mottingham area need Building Regulations approval?
Assume yes until building control says otherwise. England has no like-for-like exemption, though registered installers can self-certify replacement windows and doors in non-dwellings. That route doesn't cover structural glass, curtain walling or revolving doors.
Does a shop sign in the Mottingham area need advertisement consent?
Not always. In England, an unlit sign within Class 5 of the 2007 Advertisement Regulations generally needs no application, and neither does a lit sign within Class 4B. Anything outside those classes needs consent, and Class 4B isn't available in conservation areas, so check before ordering.