Shutters across Mottingham and Greater London are supplied under one contract with any glazing or signs on the same frontage. That way the box, the fascia and the glass are all designed as one job.
Expect us to measure the opening, photograph the existing front and check how materials will reach it on the day, at a time you have agreed.

How do you design around the building when planning perforated roller shutters in Mottingham?
On premises with a recessed entrance, the shutter line needs careful thought. We usually bring it forward to the building line, or close the recess separately, so the doorway does not become a hiding place.
If the display goes dark overnight, the shutter will read as plain metal from the street. A low-level timer on the window lighting costs very little and keeps your Mottingham frontage looking open.
Where the footway outside your Mottingham premises is narrow, a recessed entrance earns its keep. It gives people a dry place to pause out of the walkway, and it adds a longer run of display glass either side of the door.
What might perforated roller shutters cost in Mottingham?
We would budget £1,695 to £4,495 plus VAT per shutter. Scope sets most of the figure, so a clear brief at the start does more for the budget than any later change of detail.
What permissions should you check for perforated roller shutters in Mottingham?
Security grilles and shutters are named in England's rules: installing or replacing one on a shopfront sits outside the shop permitted development rights. The frontage itself is treated the same way, so for perforated roller shutters at premises in the Mottingham area, building work that materially affects the appearance needs planning permission. Confirm the position with the council before anything is ordered.
For Mottingham, the usual route for planning and advert applications is through Royal Borough of Greenwich, and we confirm that when we visit.
| Town | Mottingham |
|---|---|
| Area | Greater London |
| Postcode districts | SE12, SE13, SE3, SE9 |
| Planning authority | Royal Borough of Greenwich |
| Building approval | Building Regulations (Approved Documents) |
| Distance from Great Barr | About 112 miles |
| Survey | Free for new work |
Questions about perforated roller shutters in Mottingham
Do you remove old shutters in Mottingham?
Yes. Taking out the old curtain, box and guides, then making good the frontage, is shown as its own line in the itemised quotation.
Can a perforated shutter match my other sites in Greater London?
Yes. Send us the colour reference and curtain type from an existing site, and we match them on the new one. The box and guides may differ, because each frontage has its own structure.
What controls can a shutter have?
A key switch, a wall button or a remote are the usual choices, each with a manual override. Many shops use a key switch at the door, so closing up needs someone present.
What rules apply to a fire exit door through a shopfront in the Mottingham area?
It must open in the direction of escape and can't be locked against immediate use, and a dedicated fire exit can't be a sliding or revolving door. In England that comes from article 14(2) of the Regulatory Reform (Fire Safety) Order 2005, and the duty sits with the responsible person, normally the employer or whoever controls the premises for a business, otherwise the owner. An outward door can clash with section 153 of the Highways Act 1980 where it opens onto the footway, so raise it early.
Do I need listed building consent for a shopfront in the Mottingham area?
Usually yes, if the building is listed. In England the local planning authority decides, and Historic England is notified of Grade I and II* works and specified Grade II works. Like-for-like repair may not need consent, so ask the council before work starts.