For frameless glass doors across Cheshire, we draw first and order later. You see a scale drawing with signed-off dimensions before anything is made, so the frontage on paper is the frontage you get.
Most frontages share something with someone, be that a door to the flats above, a meter cupboard or a pilaster on the boundary. We pick those up early on frameless glass doors in Cheshire, because they are far easier to design around than to discover on the day.

How do we handle frameless glass doors for premises in Cheshire?
Older doorways are rarely square. For premises in Cheshire, we measure the opening at several points, because a door leaf cut to a nominal size will show a tapering gap all the way down one side.
Wind can hold a glass door open or slam it shut. If your entrance in Cheshire sits on an exposed corner or a straight street, we'd choose a stronger spring, a delayed close or a lobby, so the leaf stays under control.
What consents apply to frameless glass doors in Cheshire?
England has no permitted development route for changing a shopfront. Part 7 Class A of the General Permitted Development Order 2015 excludes creating, altering or replacing one, and it allows no alterations at all on article 2(3) land. That leaves two outcomes for frameless glass doors at premises in the Cheshire area: a planning application, or work that doesn't materially affect the external appearance.
How much do frameless glass doors cost in Cheshire?
The guide for frameless glass doors is £1,495 to £4,495 plus VAT per door set. Expect the lower end for simple work with clear access, and the upper end where detail, finish or awkward conditions add hours.
| Area | Cheshire |
|---|---|
| Nation | England |
| Towns covered | 23 |
| Main town | Chester |
| Planning regime | England: TCPA 1990 and the 2007 Advertisement Regulations |
| Building approval | Building Regulations (Approved Documents) |
| Survey | Free for new work, from our Great Barr base |
Questions about frameless glass doors in Cheshire
Can a frameless door go in an older doorway in Chester?
Usually, yes, subject to the survey. If the opening is out of square, we can scribe the fixed panels and keep the door gap even.
What if my floor in Cheshire can't take a floor spring?
We'd use a concealed closer in a slim transom. It keeps the look almost the same, and suits floors over a cellar or with services beneath.
Can you replace just the door at my Cheshire premises?
Yes, if the surrounding frame or glass is sound. We'd measure the opening and check the existing floor spring, as it may need replacing too.
Does a new shopfront in the Cheshire area need Building Regulations approval?
Assume yes until building control says otherwise. England has no like-for-like exemption, though registered installers can self-certify replacement windows and doors in non-dwellings. That route doesn't cover structural glass, curtain walling or revolving doors.
What rules apply to a fire exit door through a shopfront in the Cheshire area?
It must open in the direction of escape and can't be locked against immediate use, and a dedicated fire exit can't be a sliding or revolving door. In England that comes from article 14(2) of the Regulatory Reform (Fire Safety) Order 2005, and the duty sits with the responsible person, normally the employer or whoever controls the premises for a business, otherwise the owner. An outward door can clash with section 153 of the Highways Act 1980 where it opens onto the footway, so raise it early.