0800 088 6248 Get a guide price
  1. Home
  2. Services
  3. Structural glazing
  4. Cheshire

Structural glazing in Cheshire

Planned around your opening, your brand and your trading hours.

Few businesses can shut for a week, so any time on site for structural glazing in Cheshire is planned around the hours you trade. Closed-day or out-of-hours installation can be arranged.

Access gets as much attention as appearance at survey. Where a vehicle can stop, how long sections reach the opening and how the pavement stays safe for the public all shape the programme for structural glazing in Cheshire.

Structural glass frontage with glass fins and slim silicone joints on a showroom at dusk

What should you look for from structural glazing in Cheshire?

Lifting decides what is possible on most structural glazing jobs. For premises across Cheshire we walk the route from the delivery point to the opening at survey, looking for kerbs, cellar hatches and cables that would stop a glass lifter.

Sun angle changes how a glass wall reads. On a west-facing unit near Chester we would look at low-iron glass and interior finishes together, as late reflections can hide the display you paid to show.

What consents apply to structural glazing in Cheshire?

For structural glazing at premises in the Cheshire area, the deciding question in England is whether the building work materially affects the external appearance. If it does, planning permission is needed, while a true like-for-like replacement usually needs none. The council confirms the position for each site.

How much does structural glazing cost in Cheshire?

We would budget £950 to £1,850 plus VAT per m². Scope sets most of the figure, so a clear brief at the start does more for the budget than any later change of detail.

Cheshire at a glance
AreaCheshire
NationEngland
Towns covered23
Main townChester
Planning regimeEngland: TCPA 1990 and the 2007 Advertisement Regulations
Building approvalBuilding Regulations (Approved Documents)
SurveyFree for new work, from our Great Barr base

Questions about structural glazing in Cheshire

Will my existing floor in Cheshire take a concealed channel?

That depends on the depth of the floor build-up. Where it is too shallow, the channel can sit on the slab with the finish cut around it, or a raised detail can be drawn. We open up a small area at survey to find out.

Can large glass reach premises on a narrow street in Cheshire?

Often, yes, though pane size may need to change. We measure the street, the kerb and any overhead obstructions at survey, then size the glass around what a lifter can reach.

Can structural glazing be fitted while a business around Chester stays open?

Often, with a carefully agreed sequence. Lifts usually happen when the street is quiet, and closed-day or out-of-hours installation can be arranged. A temporary screen keeps the interior secure and dry until the glass is in.

What rules apply to a fire exit door through a shopfront in the Cheshire area?

It must open in the direction of escape and can't be locked against immediate use, and a dedicated fire exit can't be a sliding or revolving door. In England that comes from article 14(2) of the Regulatory Reform (Fire Safety) Order 2005, and the duty sits with the responsible person, normally the employer or whoever controls the premises for a business, otherwise the owner. An outward door can clash with section 153 of the Highways Act 1980 where it opens onto the footway, so raise it early.

Do roller shutters need planning permission in the Cheshire area?

Usually yes. Installing or replacing a security grill or shutter on a shopfront is expressly outside England's shop permitted development rights, so the only way to avoid an application is work that doesn't materially affect the appearance. Ask the council before ordering.

Planning structural glazing in Cheshire?

Send the address and a photo, and we'll come and measure it.

Call usGet a guide price