Want a clearer view into your Portslade shop? A toughened glass door on a floor spring gives you that, with slim fittings and a soft, controlled close.
We measure your Portslade opening in person, at a time agreed with you first, so the visit fits around your trading.

What makes frameless glass doors work well on Portslade premises?
In a parade in Portslade, a frameless door can sit within a framed front without looking out of place. We'd match its head height to the neighbouring transoms and keep the fittings in the frame colour.
For a brand with branches beyond Portslade, we'd fix the handle, fitting finish and manifestation as a standard. The glass is then made to each opening, so all the doors match despite different sizes.
If your Portslade unit sits in a Victorian parade, the old pilasters usually set the rhythm, so a new front should land on them and not run past them. Keep that line and even a modern frame looks as though it belongs.
Could frameless glass doors in Portslade need planning permission?
England has no permitted development route for changing a shopfront. Part 7 Class A of the General Permitted Development Order 2015 excludes creating, altering or replacing one, and it allows no alterations at all on article 2(3) land. That leaves two outcomes for frameless glass doors at premises in the Portslade area: a planning application, or work that doesn't materially affect the external appearance.
For Portslade, the usual route for planning and advert applications is through Brighton and Hove City Council, and we confirm that when we visit.
How much should you set aside for frameless glass doors in Portslade?
We would budget £1,495 to £4,495 plus VAT per door set. Scope sets most of the figure, so a clear brief at the start does more for the budget than any later change of detail.
| Town | Portslade |
|---|---|
| Area | East Sussex |
| Postcode districts | BN3, BN41, BN42, BN43 |
| Planning authority | Brighton and Hove City Council |
| Building approval | Building Regulations (Approved Documents) |
| Distance from Great Barr | About 138 miles |
| Survey | Free for new work |
Questions about frameless glass doors in Portslade
Can you reuse my existing floor spring in Portslade?
Sometimes, if it is sound and suits the new leaf. We'd test it at survey, because an old spring under a heavier door tends to fail early.
How long will my Portslade entrance be out of use?
Usually only a few hours, if the floor needs no work. Doors are often fitted outside trading hours, so you can open as normal.
Can my Portslade premises take a frameless glass door?
Most can, once the floor and opening have been checked. The survey shows whether a floor spring will fit, and if not, a concealed closer in a transom does the same job.
Do I need planning permission to change a shopfront in the Portslade area?
Usually yes, if the work materially affects the building's external appearance. England's shop permitted development rights exclude creating, altering or replacing a shopfront, so there is no shortcut. A true like-for-like replacement usually needs no application, and the council confirms the position.
Do I need listed building consent for a shopfront in the Portslade area?
Usually yes, if the building is listed. In England the local planning authority decides, and Historic England is notified of Grade I and II* works and specified Grade II works. Like-for-like repair may not need consent, so ask the council before work starts.