Colour and craft do the work on a timber front in Portslade. We test paint on your actual frontage, draw any moulding that matters at full size, and keep every dimension on paper for you to sign off.
We measure your Portslade opening in person, at a time agreed with you first, so the visit fits around your trading.

How would we approach timber shopfronts for your Portslade premises?
A brand rollout can include timber, as long as the details repeat. For a branch in Portslade we'd use the same mouldings, colours and sign panel as your other sites, adjusting only the widths and heights to fit the opening.
In a parade of mixed fronts in Portslade, painted timber can lift a unit without shouting. We'd take the height of the neighbouring cills and fascias, then let the depth of the mouldings and a considered colour do the talking.
Where a fascia has crept down over the years, lifting it back to its original line can add real height to the glass. Check what sits behind it first at Portslade premises, since a shutter box or old beam may set the limit.
What consents could affect timber shopfronts in Portslade?
A true like-for-like replacement usually needs no planning permission in England, because the external appearance isn't materially affected. New materials, a different glass line or altered proportions usually do count as material, so for timber shopfronts at premises in the Portslade area, an application is then likely. The council confirms which side of that line a job falls on.
For Portslade, the usual route for planning and advert applications is through Brighton and Hove City Council, and we confirm that when we visit.
What should you budget for timber shopfronts in Portslade?
A sensible starting budget is £3,995 to £13,995 plus VAT for a typical frontage. What shifts the figure is whatever can't be seen yet, such as the condition behind the old frontage or the services running through it.
| Town | Portslade |
|---|---|
| Area | East Sussex |
| Postcode districts | BN3, BN41, BN42, BN43 |
| Planning authority | Brighton and Hove City Council |
| Building approval | Building Regulations (Approved Documents) |
| Distance from Great Barr | About 138 miles |
| Survey | Free for new work |
Questions about timber shopfronts in Portslade
Do you make the joinery for Portslade shops to order?
Yes. Every length is made to the signed-off drawings for your opening, then brought to Portslade from Great Barr by vetted teams working under S&K Glazing.
Will timber suffer on my Portslade frontage if it gets a lot of rain?
Not if the details are right. Sloped cills, sealed end grain and plinth blocks keep water moving, and the paint system then only has to deal with the weather, not trapped damp.
What should I budget for looking after a timber front in Portslade?
A repaint every 5 to 7 years, plus a yearly wash and touch-up of the cills. Door gear needs checking too, since seasonal movement can throw a door out of line.
What rules apply to a fire exit door through a shopfront in the Portslade area?
It must open in the direction of escape and can't be locked against immediate use, and a dedicated fire exit can't be a sliding or revolving door. In England that comes from article 14(2) of the Regulatory Reform (Fire Safety) Order 2005, and the duty sits with the responsible person, normally the employer or whoever controls the premises for a business, otherwise the owner. An outward door can clash with section 153 of the Highways Act 1980 where it opens onto the footway, so raise it early.
Does the Equality Act apply to a shop entrance in the Portslade area?
Yes. The Equality Act 2010 applies in England, as across Great Britain, and it requires reasonable steps to remove, alter or avoid physical features that disadvantage disabled people. The duty is anticipatory, so it looks at disabled people generally, and a new Services Code replaced the 2011 Code on 5 August 2026.