Looking for a front with more character on your Lancing premises? A painted timber frontage, built up in layers and proportioned to the building, has a warmth that reads from across the street.
It helps if you can be there when we visit Lancing, since five minutes walking the frontage together answers more than a long email.

How do you design around the building when planning timber shopfronts in Lancing?
If your Lancing premises have a deep recessed entrance, timber can make it feel like a welcome. We'd panel the returns, add a lit soffit and lay a hard-wearing threshold, keeping the end grain of every post clear of the wet.
A south or west-facing Lancing frontage is hard on paint. We'd steer you toward a lighter colour or a more stable timber, and if the brand needs a dark finish, we'd plan a shorter repaint interval from the outset.
Where the building has good brick or stone around the opening, set the frame back in the reveal so the masonry can be seen. On Lancing premises with a flat elevation, that deep reveal throws a shadow line that adds real depth in low sun.
What might timber shopfronts cost in Lancing?
Allow £3,995 to £13,995 plus VAT for a typical frontage. Size and specification set most of that figure for timber shopfronts, and the rest depends on what the survey finds on site.
What permissions should you check for timber shopfronts in Lancing?
England has no permitted development route for changing a shopfront. Part 7 Class A of the General Permitted Development Order 2015 excludes creating, altering or replacing one, and it allows no alterations at all on article 2(3) land. That leaves two outcomes for timber shopfronts at premises in the Lancing area: a planning application, or work that doesn't materially affect the external appearance.
For Lancing, the usual route for planning and advert applications is through Adur District Council, and we confirm that when we visit.
| Town | Lancing |
|---|---|
| Area | West Sussex |
| Postcode districts | BN15 |
| Planning authority | Adur District Council |
| Building approval | Building Regulations (Approved Documents) |
| Distance from Great Barr | About 137 miles |
| Survey | Free for new work |
Questions about timber shopfronts in Lancing
Do you make the joinery for Lancing shops to order?
Yes. Every length is made to the signed-off drawings for your opening, then brought to Lancing from Great Barr by vetted teams working under S&K Glazing.
Can you fit a timber front around existing tiles in Lancing?
Often, yes, and it's usually worth trying. If your stallriser or entrance has good original tile, we'd measure it carefully and scribe the new joinery to it.
Will timber suffer on my Lancing frontage if it gets a lot of rain?
Not if the details are right. Sloped cills, sealed end grain and plinth blocks keep water moving, and the paint system then only has to deal with the weather, not trapped damp.
Does the Equality Act apply to a shop entrance in the Lancing area?
Yes. The Equality Act 2010 applies in England, as across Great Britain, and it requires reasonable steps to remove, alter or avoid physical features that disadvantage disabled people. The duty is anticipatory, so it looks at disabled people generally, and a new Services Code replaced the 2011 Code on 5 August 2026.
Does a new shopfront in the Lancing area need Building Regulations approval?
Assume yes until building control says otherwise. England has no like-for-like exemption, though registered installers can self-certify replacement windows and doors in non-dwellings. That route doesn't cover structural glass, curtain walling or revolving doors.