Each frameless door for Tooting premises is made to a final check measure, never to a rough size. We travel from Great Barr to fit it, and you'll have one named contact from start to finish.
Surveys for Tooting are booked with you directly. Tell us your quieter days and we'll work around them.

What makes frameless glass doors work well on Tooting premises?
A frameless door can often be swapped overnight at Tooting premises that can't close. We'd complete the check measure in advance, take the old door off after trading and hang the new one before you open.
A narrow Tooting unit benefits from a door that takes up no visual width. We'd use a single glass leaf hung beside one clear pane, so the entrance and the display read as one view into the shop.
A corner unit has two fronts to think about, and the return elevation often does as much selling as the main one. If that is your layout in Tooting, carry the fascia and glass line round the corner and treat both faces as one composition.
Could frameless glass doors in Tooting need planning permission?
Security grilles and shutters are named in England's rules: installing or replacing one on a shopfront sits outside the shop permitted development rights. The frontage itself is treated the same way, so for frameless glass doors at premises in the Tooting area, building work that materially affects the appearance needs planning permission. Confirm the position with the council before anything is ordered.
Tooting applications for planning permission or advertisement consent are normally handled by London Borough of Wandsworth. Our survey includes a check of the position for your address.
How much should you set aside for frameless glass doors in Tooting?
The guide for frameless glass doors is £1,495 to £4,495 plus VAT per door set. Expect the lower end for simple work with clear access, and the upper end where detail, finish or awkward conditions add hours.
| Town | Tooting |
|---|---|
| Area | Greater London |
| Postcode districts | CR4, SW12, SW16, SW17 |
| Planning authority | London Borough of Wandsworth |
| Building approval | Building Regulations (Approved Documents) |
| Distance from Great Barr | About 108 miles |
| Survey | Free for new work |
Does Wandsworth Borough Council publish shopfront guidance?
Yes, Shopfronts SPG (1988). It tells applicants what the council expects from new and altered shopfronts. A few of the things it asks for:
- Stallrisers should be retained where possible and be at least 500mm high, or reach the top of the pilaster base.
- Solid external metal shutters are discouraged, with boxes set behind the fascia or recessed flush and guides colour-coated to match.
- Internally lit box fascias and projecting box signs are generally unsuitable in conservation areas and on traditional shopfronts.
Questions about frameless glass doors in Tooting
Can my Tooting premises take a frameless glass door?
Most can, once the floor and opening have been checked. The survey shows whether a floor spring will fit, and if not, a concealed closer in a transom does the same job.
Can you reuse my existing floor spring in Tooting?
Sometimes, if it is sound and suits the new leaf. We'd test it at survey, because an old spring under a heavier door tends to fail early.
How long will my Tooting entrance be out of use?
Usually only a few hours, if the floor needs no work. Doors are often fitted outside trading hours, so you can open as normal.
Does the Equality Act apply to a shop entrance in the Tooting area?
Yes. The Equality Act 2010 applies in England, as across Great Britain, and it requires reasonable steps to remove, alter or avoid physical features that disadvantage disabled people. The duty is anticipatory, so it looks at disabled people generally, and a new Services Code replaced the 2011 Code on 5 August 2026.
Does a new shopfront in the Tooting area need Building Regulations approval?
Assume yes until building control says otherwise. England has no like-for-like exemption, though registered installers can self-certify replacement windows and doors in non-dwellings. That route doesn't cover structural glass, curtain walling or revolving doors.