Old tiles, carved brackets and slim glazing bars give a frontage in Canning Town a quality new work struggles to match. Where they've survived we keep them, and where they've gone we draw their replacements at full size.
A survey in Canning Town usually starts outside, looking at the whole elevation before any tape comes out, because the frontage has to answer the building above it.

How do you design around the building when planning heritage shopfronts in Canning Town?
Sun is hard on old paintwork and putty. For a south-facing period front in Canning Town, we'd look at a traditional retractable blind, which shades the glass, protects the stock and brings back a useful feature.
Period corner shops often had a canted entrance or a curved pane. If yours did, the floor and ceiling at your Canning Town premises may still show its line, and we'd look for those marks before redesigning the corner.
Where units share one long run of fascia, breaking the height makes you stand out for the wrong reason. If that describes your Canning Town parade, keep the line and win attention with lettering, lighting and what's in the window.
What might heritage shopfronts cost in Canning Town?
A sensible starting budget is £8,495 to £24,995 plus VAT for a typical frontage. What shifts the figure is whatever can't be seen yet, such as the condition behind the old frontage or the services running through it.
What permissions should you check for heritage shopfronts in Canning Town?
Security grilles and shutters are named in England's rules: installing or replacing one on a shopfront sits outside the shop permitted development rights. The frontage itself is treated the same way, so for heritage shopfronts at premises in the Canning Town area, building work that materially affects the appearance needs planning permission. Confirm the position with the council before anything is ordered.
Planning and advert applications for Canning Town premises normally go to London Borough of Newham. We check the position for your address at survey.
| Town | Canning Town |
|---|---|
| Area | Greater London |
| Postcode districts | E13, E14, E16, E6 |
| Planning authority | London Borough of Newham |
| Building approval | Building Regulations (Approved Documents) |
| Distance from Great Barr | About 109 miles |
| Survey | Free for new work |
Questions about heritage shopfronts in Canning Town
What does a period survey of my Canning Town shop involve?
We measure the front, photograph every detail and check the condition of timber, paint and glass. With your agreement, we may lift a small piece of later boarding to see what survives behind it.
How much of my Canning Town shopfront can be kept?
Usually more than it first appears. Decay tends to stay low on posts and doors, while the upper joinery is often sound and can stay.
How long will restoration take at my Canning Town premises?
New joinery typically takes 8 to 14 weeks to make, then 1 to 3 weeks on site. The survey gives you a realistic programme, because repair-only jobs can take far less.
What rules apply to a fire exit door through a shopfront in the Canning Town area?
It must open in the direction of escape and can't be locked against immediate use, and a dedicated fire exit can't be a sliding or revolving door. In England that comes from article 14(2) of the Regulatory Reform (Fire Safety) Order 2005, and the duty sits with the responsible person, normally the employer or whoever controls the premises for a business, otherwise the owner. An outward door can clash with section 153 of the Highways Act 1980 where it opens onto the footway, so raise it early.
Do roller shutters need planning permission in the Canning Town area?
Usually yes. Installing or replacing a security grill or shutter on a shopfront is expressly outside England's shop permitted development rights, so the only way to avoid an application is work that doesn't materially affect the appearance. Ask the council before ordering.