Underneath a later fascia on your Inverness premises, there may be more of the old front than you think. Our survey looks for the brackets, cornices and ghost lines that show how it once looked.
Measuring the opening is the easy part of a survey in Inverness. We also look at the beam above, the pavement fall and any meters or drains nearby.

Where should you begin with heritage shopfronts in Inverness?
In a parade of matching period fronts in Inverness, your neighbours are the pattern book. If their pilasters or cornices survive, we'd copy those sizes so your unit rejoins the row.
A brand with a standard front can still take on a period unit. For a branch in Inverness we'd translate its colours and lettering into traditional joinery and sign writing, so the building keeps its character and the name stays recognisable.
If the pavement falls across your frontage, let the stallriser take up the slope and keep the glass line dead level. The eye reads the long horizontal, so Inverness premises on a slope look settled once that line is true.
What sign-off might you need for heritage shopfronts in Inverness?
Class 9A, Scotland's shop permitted development right, gives no route for a shopfront change. It covers Class 1A premises, but not work that alters or extends beyond the existing front, and it doesn't apply in conservation areas, National Parks or World Heritage Sites. For heritage shopfronts at premises in the Inverness area, that generally means a planning application unless the external appearance isn't materially affected.
At survey we check how things stand for your building, although applications for planning permission or advertisement consent here normally go to The Highland Council.
What price should you expect for heritage shopfronts in Inverness?
Until the survey is done, plan on £8,495 to £24,995 plus VAT for a typical frontage. Unusual sizes, fine detail and phased working push the figure up, while a simple brief and clear access keep it toward the lower end.
Do you cover Inverness?
We can take on work in Inverness, with the survey arranged directly with you once we understand the job. Travel and access appear as their own lines on the quotation, apart from the cost of the frontage.
| Town | Inverness |
|---|---|
| Area | Highlands and Moray |
| Postcode districts | IV1, IV3 |
| Planning authority | The Highland Council |
| Building approval | Building warrant (Technical Handbook) |
| Distance from Great Barr | About 353 miles |
| Survey | By arrangement |
Does The Highland Council publish shopfront guidance?
Yes, Shopfront Design Guide: Planning Guidance (2018). It tells applicants what the council expects from new and altered shopfronts. A few of the things it asks for:
- Stallrisers should be at least 400mm high, and glazing to ground level is generally not acceptable on traditional shopfronts.
- Fascias must not be internally lit or span more than one building, and lettering should fill no more than two-thirds of the fascia.
- Solid shutters are not supported, and external retractable shuttering is unlikely to be acceptable in conservation areas or on listed buildings.
Questions about heritage shopfronts in Inverness
Who makes the joinery for Inverness premises?
Specialist joiners vetted by us and working under S&K Glazing make and fit it. You deal with one named contact, and the contract is with S&K Glazing Limited.
How long will restoration take at my Inverness premises?
New joinery typically takes 8 to 14 weeks to make, then 1 to 3 weeks on site. The survey gives you a realistic programme, because repair-only jobs can take far less.
What does a period survey of my Inverness shop involve?
We measure the front, photograph every detail and check the condition of timber, paint and glass. With your agreement, we may lift a small piece of later boarding to see what survives behind it.
Does the Equality Act cover a shop entrance in the Inverness area?
Yes. The Equality Act 2010 applies in Scotland as part of Great Britain, and its anticipatory duty expects reasonable steps to remove, alter or avoid physical features that disadvantage disabled people generally. BS 8300-2:2018 is the current British Standard for accessible buildings.
Do roller shutters need planning permission in the Inverness area?
Usually yes, if they materially affect the external appearance. Class 9A doesn't name shutters, so in Scotland treat them as falling to the appearance test rather than assuming a permitted development route. Ask the council before ordering, as this is a reading of the rules and not an official statement.