For a facade in Inverness, the grid matters more than any single pane. Mullions, transoms and spandrels are drawn together so the elevation reads as one composition from across the road.
Measuring the opening is the easy part of a survey in Inverness. We also look at the beam above, the pavement fall and any meters or drains nearby.

How do you design around the building when planning curtain walling in Inverness?
Should the floors above stay occupied, the work can be phased bay by bay, with temporary weathering at the end of each shift. Tenants keep their rooms dry and the old elevation comes out in an order that suits the building.
If your Inverness premises have a concrete frame, we open up a sample of slab edges at survey and plan brackets around what is really there. Steel frames and older masonry piers each need a different fixing, so nothing is priced from assumptions.
If the pavement falls across your frontage, let the stallriser take up the slope and keep the glass line dead level. The eye reads the long horizontal, so Inverness premises on a slope look settled once that line is true.
What might curtain walling cost in Inverness?
The guide for curtain walling is £550 to £1,250 plus VAT per m². Expect the lower end for simple work with clear access, and the upper end where detail, finish or awkward conditions add hours.
What permissions should you check for curtain walling in Inverness?
Shutters aren't named in Class 9A, so in Scotland they usually fall to the appearance test. The same goes for curtain walling at premises in the Inverness area: building work that materially affects the external appearance needs planning permission, and a true like-for-like usually doesn't. Ask the council to confirm the position for your site.
At survey we check how things stand for your building, although applications for planning permission or advertisement consent here normally go to The Highland Council.
Do you cover Inverness?
We can take on work in Inverness, with the survey arranged directly with you once we understand the job. Travel and access appear as their own lines on the quotation, apart from the cost of the frontage.
| Town | Inverness |
|---|---|
| Area | Highlands and Moray |
| Postcode districts | IV1, IV3 |
| Planning authority | The Highland Council |
| Building approval | Building warrant (Technical Handbook) |
| Distance from Great Barr | About 353 miles |
| Survey | By arrangement |
Does The Highland Council publish shopfront guidance?
Yes, Shopfront Design Guide: Planning Guidance (2018). It tells applicants what the council expects from new and altered shopfronts. A few of the things it asks for:
- Stallrisers should be at least 400mm high, and glazing to ground level is generally not acceptable on traditional shopfronts.
- Fascias must not be internally lit or span more than one building, and lettering should fill no more than two-thirds of the fascia.
- Solid shutters are not supported, and external retractable shuttering is unlikely to be acceptable in conservation areas or on listed buildings.
Questions about curtain walling in Inverness
Can you replace failing curtain walling on premises in Inverness?
Yes. We survey the frame, brackets and seals first, because some elevations only need new glass and gaskets. If the frame itself has failed, we draw a replacement that can be phased around the building's use.
Can part of an elevation in Inverness be done first?
Yes, provided the break falls at a sensible mullion. Phasing can spread cost and disruption, although two visits usually cost more than one. We would draw the whole elevation first so the second phase matches.
Who do I deal with during a curtain walling job in Inverness?
You have one named contact from survey to handover. The contract is with S&K Glazing Limited, and vetted teams working under S&K Glazing carry out the work.
Does the Equality Act cover a shop entrance in the Inverness area?
Yes. The Equality Act 2010 applies in Scotland as part of Great Britain, and its anticipatory duty expects reasonable steps to remove, alter or avoid physical features that disadvantage disabled people generally. BS 8300-2:2018 is the current British Standard for accessible buildings.
Do I need listed building consent for a shopfront in the Inverness area?
Almost certainly, if the building is listed and windows or doors are changing, according to Historic Environment Scotland. The planning authority decides, and Historic Environment Scotland is consulted on some applications. Scottish Ministers are notified if it objects.