0800 088 6248 Get a guide price
  1. Home
  2. Services
  3. Curtain walling
  4. Highlands and Moray

Curtain walling in the Highlands and Moray

One contract and one named contact for curtain walling across the Highlands and Moray.

Seen a frontage you admire? Bring the picture to our first talk about curtain walling in the Highlands and Moray, and we will work out what makes it succeed, from fascia depth to glass line, and what that means for your building.

Openings are rarely square or level, so the survey for curtain walling records diagonals, pavement fall and head height at several points. Those few millimetres decide whether the finished front sits true against the building.

Aluminium curtain walling with slim mullions across a two-storey commercial facade at dusk

What makes curtain walling work well for premises in the Highlands and Moray?

Occupied upper floors change the sequence. Many elevations in the Highlands and Moray can come out one bay at a time, with temporary weathering each evening so the rooms behind stay dry.

Running more than one building in the Highlands and Moray? A shared grid, cap profile and colour reference can travel from Inverness to every other site, so each facade reads as part of one family.

What consents apply to curtain walling in the Highlands and Moray?

Shutters aren't named in Class 9A, so in Scotland they usually fall to the appearance test. The same goes for curtain walling at premises in the Highlands and Moray area: building work that materially affects the external appearance needs planning permission, and a true like-for-like usually doesn't. Ask the council to confirm the position for your site.

How much does curtain walling cost in the Highlands and Moray?

Until the survey is done, plan on £550 to £1,250 plus VAT per m². Unusual sizes, fine detail and phased working push the figure up, while a simple brief and clear access keep it toward the lower end.

Highlands and Moray at a glance
AreaHighlands and Moray
NationScotland
Towns covered5
Main townInverness
Planning regimeScotland: 1997 Planning Act and the 1984 Advertisement Regulations
Building approvalBuilding warrant (Technical Handbook)
SurveyBy arrangement

Does The Highland Council publish shopfront guidance?

Yes, Shopfront Design Guide: Planning Guidance (2018). It tells applicants what the council expects from new and altered shopfronts. A few of the things it asks for:

  • Stallrisers should be at least 400mm high, and glazing to ground level is generally not acceptable on traditional shopfronts.
  • Fascias must not be internally lit or span more than one building, and lettering should fill no more than two-thirds of the fascia.
  • Solid shutters are not supported, and external retractable shuttering is unlikely to be acceptable in conservation areas or on listed buildings.

Read our summary of the Highland guidance

Questions about curtain walling in the Highlands and Moray

Do you replace old curtain walling in the Highlands and Moray as well as fit new?

Yes. We check the existing brackets, seals and framing first, because a sound frame may only need new glass, gaskets and caps. If it has failed, we draw a full replacement and phase it around the building.

Can one contract cover the curtain wall and shopfront on premises in the Highlands and Moray?

Yes. Frame, glass, doors and signs can all sit in one contract with S&K Glazing, so the junction between upper and lower elevations has a single owner. That junction is where separate trades most often leave a gap.

What access does curtain walling need on premises in the Highlands and Moray?

That depends on height and on what sits below the elevation. Low work can often go from a tower or mobile platform, while taller facades usually need scaffold. Access is itemised in the quotation, so you can see exactly what it adds.

Do I need listed building consent for a shopfront in the Highlands and Moray area?

Almost certainly, if the building is listed and windows or doors are changing, according to Historic Environment Scotland. The planning authority decides, and Historic Environment Scotland is consulted on some applications. Scottish Ministers are notified if it objects.

Do roller shutters need planning permission in the Highlands and Moray area?

Usually yes, if they materially affect the external appearance. Class 9A doesn't name shutters, so in Scotland treat them as falling to the appearance test rather than assuming a permitted development route. Ask the council before ordering, as this is a reading of the rules and not an official statement.

Planning curtain walling in the Highlands and Moray?

Send the address and a photo, and we'll arrange a survey.

Call usGet a guide price