0800 088 6248 Get a guide price
  1. Home
  2. Services
  3. Stallrisers and cladding
  4. Highlands and Moray

Stallrisers and cladding in the Highlands and Moray

Highlands and Moray premises surveyed in person, drawn to scale and priced line by line.

Every enquiry for stallrisers and cladding in the Highlands and Moray begins with a measured survey at the premises, because a price taken from a photograph is only a guess. That visit gives you real dimensions before anyone draws a line or orders a thing.

Finishes behave differently at full size. Any sample we show you for stallrisers and cladding is better judged at the premises in daylight, since a colour that looks quiet on a desk can read much louder across a whole elevation.

Dark glazed tile stallriser beneath a slim shop window with a metal kick plate at the entrance

How should you approach stallrisers and cladding in the Highlands and Moray?

Stone and tile need a clean, dry surface and time to set. If your unit around Inverness opens straight onto the pavement, we cut off site and keep the working area small so the entrance stays usable.

Neighbouring frontages are the first reference for height. At survey near Inverness we note the sill lines on either side of your unit, then decide whether to match them or make a deliberate break.

What consents apply to stallrisers and cladding in the Highlands and Moray?

Section 26 of the Town and Country Planning (Scotland) Act 1997 sets the test: work that doesn't materially affect the external appearance isn't development. For stallrisers and cladding at premises in the Highlands and Moray area, anything that does needs planning permission, and a true like-for-like replacement usually doesn't. The council confirms how that applies to each site.

How much do stallrisers and cladding cost in the Highlands and Moray?

Allow £195 to £495 plus VAT per m². Size and specification set most of that figure for stallrisers and cladding, and the rest depends on what the survey finds on site.

Highlands and Moray at a glance
AreaHighlands and Moray
NationScotland
Towns covered5
Main townInverness
Planning regimeScotland: 1997 Planning Act and the 1984 Advertisement Regulations
Building approvalBuilding warrant (Technical Handbook)
SurveyBy arrangement

Does The Highland Council publish shopfront guidance?

Yes, Shopfront Design Guide: Planning Guidance (2018). It tells applicants what the council expects from new and altered shopfronts. A few of the things it asks for:

  • Stallrisers should be at least 400mm high, and glazing to ground level is generally not acceptable on traditional shopfronts.
  • Fascias must not be internally lit or span more than one building, and lettering should fill no more than two-thirds of the fascia.
  • Solid shutters are not supported, and external retractable shuttering is unlikely to be acceptable in conservation areas or on listed buildings.

Read our summary of the Highland guidance

Questions about stallrisers and cladding in the Highlands and Moray

Can you match an existing tiled stallriser on premises in the Highlands and Moray?

Often, yes, though an exact glaze match can be difficult. We take a sample tile, compare it with what is available, and suggest a specialist tile or a change at a natural break if the colour cannot be found.

Can you reclad only the stallriser on my premises in the Highlands and Moray?

Yes. It is one of the simplest ways to lift a tired frontage, provided the frame above is sound. We check the sill detail first, because a new facing must not trap water beneath it.

Will road salt damage a metal stallriser in the Highlands and Moray?

It will, if cut edges are left exposed. We use folded sheet with hidden edges, keep the base clear of the pavement and fit a replaceable plinth where salt is heavy.

Does a shop sign in the Highlands and Moray area need advertisement consent?

Not always. Scotland's 1984 Regulations let an unlit sign within Class IV(1) go up without an application, and Class VI does the same for a lit sign with each character lit from within. Class VI isn't available in conservation areas, and one council says lit signs always need express consent, so ask first.

Do I need listed building consent for a shopfront in the Highlands and Moray area?

Almost certainly, if the building is listed and windows or doors are changing, according to Historic Environment Scotland. The planning authority decides, and Historic Environment Scotland is consulted on some applications. Scottish Ministers are notified if it objects.

Planning stallrisers and cladding in the Highlands and Moray?

Send the address and a photo, and we'll arrange a survey.

Call usGet a guide price