From Inverness to the furthest corner of the Highlands and Moray, the sequence for curved glass shopfronts stays the same: survey, drawings, written price, then work on site. We travel from Great Barr in Birmingham and use vetted teams working under S&K Glazing.
Most frontages share something with someone, be that a door to the flats above, a meter cupboard or a pilaster on the boundary. We pick those up early on curved glass shopfronts in the Highlands and Moray, because they are far easier to design around than to discover on the day.

What should you settle before committing to curved glass shopfronts in the Highlands and Moray?
A curved pane follows the building instead of a catalogue. For premises across the Highlands and Moray we template the real corner at floor, waist and head height, because old brickwork often drifts from one radius to another.
Curves change how a corner reads after dark. For a unit in Inverness or anywhere in the Highlands and Moray, we'd run lighting with the arc, because a single bright spot on curved glass pulls the eye to the reflection instead of the display.
What consents apply to curved glass shopfronts in the Highlands and Moray?
Scottish guidance says like-for-like windows need no permission, and a true like-for-like frontage replacement usually follows the same logic. Class 7A covers altering or replacing an existing window, but it doesn't mention shopfronts, so ask before relying on it for a display window. For curved glass shopfronts at premises in the Highlands and Moray area, a material effect on the external appearance means planning permission, and the council confirms the position.
How much do curved glass shopfronts cost in the Highlands and Moray?
A sensible starting budget is £6,995 to £19,995 plus VAT for a typical frontage. What shifts the figure is whatever can't be seen yet, such as the condition behind the old frontage or the services running through it.
| Area | Highlands and Moray |
|---|---|
| Nation | Scotland |
| Towns covered | 5 |
| Main town | Inverness |
| Planning regime | Scotland: 1997 Planning Act and the 1984 Advertisement Regulations |
| Building approval | Building warrant (Technical Handbook) |
| Survey | By arrangement |
Does The Highland Council publish shopfront guidance?
Yes, Shopfront Design Guide: Planning Guidance (2018). It tells applicants what the council expects from new and altered shopfronts. A few of the things it asks for:
- Stallrisers should be at least 400mm high, and glazing to ground level is generally not acceptable on traditional shopfronts.
- Fascias must not be internally lit or span more than one building, and lettering should fill no more than two-thirds of the fascia.
- Solid shutters are not supported, and external retractable shuttering is unlikely to be acceptable in conservation areas or on listed buildings.
Questions about curved glass shopfronts in the Highlands and Moray
Is a faceted front a sensible alternative in the Highlands and Moray?
Often, yes, especially on a wide radius. Narrow flat panes give a soft curve from a distance, cost less and are far simpler to replace.
Do you supply curved glass shopfronts across the Highlands and Moray?
Yes. We travel from Great Barr to template the curve and fit the glass, with the panes made to that template.
What if my corner in the Highlands and Moray is not a true curve?
Most aren't. We set the glass to the closest arc and absorb the rest in the head and floor channels, or build out the surround where the building drifts too far.
Does a shop sign in the Highlands and Moray area need advertisement consent?
Not always. Scotland's 1984 Regulations let an unlit sign within Class IV(1) go up without an application, and Class VI does the same for a lit sign with each character lit from within. Class VI isn't available in conservation areas, and one council says lit signs always need express consent, so ask first.
Which way must a fire exit door open on a shop in the Highlands and Moray area?
In the direction of escape. Regulation 13(2) of the Fire Safety (Scotland) Regulations 2006 also rules out sliding and revolving doors on a dedicated fire exit and says fire exit doors can't be locked against immediate use. Duties sit with dutyholders under Part 3 of the Fire (Scotland) Act 2005, meaning the employer and any person with control of the premises.