0800 088 6248 Get a guide price
  1. Home
  2. Services
  3. Automatic sliding doors
  4. Highlands and Moray

Automatic sliding doors in the Highlands and Moray

For the Highlands and Moray businesses that care how the front of the building looks.

One contract covers the frontage when you come to us for automatic sliding doors in the Highlands and Moray, so glass, frame, sign and shutter aren't separate trades to chase. You also keep one named contact from first visit to handover.

Openings are rarely square or level, so the survey for automatic sliding doors records diagonals, pavement fall and head height at several points. Those few millimetres decide whether the finished front sits true against the building.

Bi-parting automatic sliding glass doors in a slim aluminium frame at a shop entrance

Where do you start with automatic sliding doors in the Highlands and Moray?

Servicing should be thought about at the start. For premises in the Highlands and Moray, we'd place the operator cover and isolator where an engineer can reach them from a short ladder, with no need to disturb the fascia.

If your premises in the Highlands and Moray lose heat each time the door opens, the answer may be in the settings. Shorter hold-open times, a tighter sensor field and a night mode often cost less than new hardware, with an air curtain as the next step.

What consents apply to automatic sliding doors in the Highlands and Moray?

Shutters aren't named in Class 9A, so in Scotland they usually fall to the appearance test. The same goes for automatic sliding doors at premises in the Highlands and Moray area: building work that materially affects the external appearance needs planning permission, and a true like-for-like usually doesn't. Ask the council to confirm the position for your site.

How much do automatic sliding doors cost in the Highlands and Moray?

Our guide band is £3,895 to £11,995 plus VAT per entrance. Scope is the biggest lever, so a tighter brief for automatic sliding doors brings the figure down faster than any change of detail.

Highlands and Moray at a glance
AreaHighlands and Moray
NationScotland
Towns covered5
Main townInverness
Planning regimeScotland: 1997 Planning Act and the 1984 Advertisement Regulations
Building approvalBuilding warrant (Technical Handbook)
SurveyBy arrangement

Does The Highland Council publish shopfront guidance?

Yes, Shopfront Design Guide: Planning Guidance (2018). It tells applicants what the council expects from new and altered shopfronts. A few of the things it asks for:

  • Stallrisers should be at least 400mm high, and glazing to ground level is generally not acceptable on traditional shopfronts.
  • Fascias must not be internally lit or span more than one building, and lettering should fill no more than two-thirds of the fascia.
  • Solid shutters are not supported, and external retractable shuttering is unlikely to be acceptable in conservation areas or on listed buildings.

Read our summary of the Highland guidance

Questions about automatic sliding doors in the Highlands and Moray

Will an automatic door work in an exposed part of the Highlands and Moray?

Usually, with the right drive and some shelter. Wind pressure on tall leaves is the main thing to design for, so we look at a recess or lobby first.

How long does an automatic door take for a site in the Highlands and Moray?

Doors are typically ready 3 to 6 weeks after sign-off, and fitting typically takes 1 to 3 days. Electrical work needs booking in with the fit.

Do you fit automatic sliding doors across the Highlands and Moray?

Yes. We travel from Great Barr to survey the entrance, then fit and set up the door with a vetted team.

Which way must a fire exit door open on a shop in the Highlands and Moray area?

In the direction of escape. Regulation 13(2) of the Fire Safety (Scotland) Regulations 2006 also rules out sliding and revolving doors on a dedicated fire exit and says fire exit doors can't be locked against immediate use. Duties sit with dutyholders under Part 3 of the Fire (Scotland) Act 2005, meaning the employer and any person with control of the premises.

Does a shop sign in the Highlands and Moray area need advertisement consent?

Not always. Scotland's 1984 Regulations let an unlit sign within Class IV(1) go up without an application, and Class VI does the same for a lit sign with each character lit from within. Class VI isn't available in conservation areas, and one council says lit signs always need express consent, so ask first.

Planning automatic sliding doors in the Highlands and Moray?

Send the address and a photo, and we'll arrange a survey.

Call usGet a guide price