0800 088 6248 Get a guide price
  1. Home
  2. Services
  3. Perforated roller shutters
  4. Highlands and Moray

Perforated roller shutters in the Highlands and Moray

Highlands and Moray premises surveyed in person, drawn to scale and priced line by line.

Few businesses can shut for a week, so any time on site for perforated roller shutters in the Highlands and Moray is planned around the hours you trade. Closed-day or out-of-hours installation can be arranged.

Daylight is only half the brief for perforated roller shutters, because a frontage keeps working after dark. Think about how the glass, the sign and the view inside will read to someone walking past at six o'clock on a winter evening.

Perforated aluminium roller shutter over a lit shop display, seen from the pavement after dark

How should you approach perforated roller shutters in the Highlands and Moray?

Daily use wears a shutter faster than a stated life suggests. If yours near Inverness goes up and down several times a day, we specify a motor and curtain for that duty.

Footfall after dark shapes the choice. If your premises in the Highlands and Moray sit where people walk past in the evening, a dark perforated curtain keeps the frontage alive, while a site that goes quiet may need a stronger specification.

What consents apply to perforated roller shutters in the Highlands and Moray?

Section 26 of the Town and Country Planning (Scotland) Act 1997 sets the test: work that doesn't materially affect the external appearance isn't development. For perforated roller shutters at premises in the Highlands and Moray area, anything that does needs planning permission, and a true like-for-like replacement usually doesn't. The council confirms how that applies to each site.

How much do perforated roller shutters cost in the Highlands and Moray?

We would budget £1,695 to £4,495 plus VAT per shutter. Scope sets most of the figure, so a clear brief at the start does more for the budget than any later change of detail.

Highlands and Moray at a glance
AreaHighlands and Moray
NationScotland
Towns covered5
Main townInverness
Planning regimeScotland: 1997 Planning Act and the 1984 Advertisement Regulations
Building approvalBuilding warrant (Technical Handbook)
SurveyBy arrangement

Does The Highland Council publish shopfront guidance?

Yes, Shopfront Design Guide: Planning Guidance (2018). It tells applicants what the council expects from new and altered shopfronts. A few of the things it asks for:

  • Stallrisers should be at least 400mm high, and glazing to ground level is generally not acceptable on traditional shopfronts.
  • Fascias must not be internally lit or span more than one building, and lettering should fill no more than two-thirds of the fascia.
  • Solid shutters are not supported, and external retractable shuttering is unlikely to be acceptable in conservation areas or on listed buildings.

Read our summary of the Highland guidance

Questions about perforated roller shutters in the Highlands and Moray

Can an existing shopfront in the Highlands and Moray take an internal shutter?

Often, yes, if there is room for the box and guides behind the frame. We check the ceiling, window bed and any display fittings at survey.

Can you replace an old solid shutter on premises in the Highlands and Moray?

Yes. We check the box size and guides, because a perforated curtain can sometimes reuse them. If the old shutter sits awkwardly on the frontage, we would also show you an internal option.

Will a shutter stop the need for laminated glass in the Highlands and Moray?

Not if it sits inside the glass, because the pane stays exposed. Many shops combine a good laminate with an internal shutter, which protects both the frontage and the stock.

Do I need planning permission to alter a shopfront in the Highlands and Moray area?

Usually yes, if the work materially affects the external appearance. Class 9A, Scotland's shop permitted development right, doesn't cover work that alters or extends beyond the existing front. A true like-for-like replacement usually needs no permission, and the council confirms the position.

Do roller shutters need planning permission in the Highlands and Moray area?

Usually yes, if they materially affect the external appearance. Class 9A doesn't name shutters, so in Scotland treat them as falling to the appearance test rather than assuming a permitted development route. Ask the council before ordering, as this is a reading of the rules and not an official statement.

Planning perforated roller shutters in the Highlands and Moray?

Send the address and a photo, and we'll arrange a survey.

Call usGet a guide price