0800 088 6248 Get a guide price
  1. Home
  2. Services
  3. Structural glazing
  4. Highlands and Moray

Structural glazing in the Highlands and Moray

A written, itemised price for structural glazing in the Highlands and Moray, valid for 90 days.

One contract covers the frontage when you come to us for structural glazing in the Highlands and Moray, so glass, frame, sign and shutter aren't separate trades to chase. You also keep one named contact from first visit to handover.

Most frontages share something with someone, be that a door to the flats above, a meter cupboard or a pilaster on the boundary. We pick those up early on structural glazing in the Highlands and Moray, because they are far easier to design around than to discover on the day.

Structural glass frontage with glass fins and slim silicone joints on a showroom at dusk

How do we handle structural glazing for premises in the Highlands and Moray?

Floors are seldom level, and a frameless elevation gives that away. On premises in the Highlands and Moray we survey the falls across the full width, then set packers and channels so the joints stay parallel from end to end.

Lifting decides what is possible on most structural glazing jobs. For premises across the Highlands and Moray we walk the route from the delivery point to the opening at survey, looking for kerbs, cellar hatches and cables that would stop a glass lifter.

What consents apply to structural glazing in the Highlands and Moray?

Shutters aren't named in Class 9A, so in Scotland they usually fall to the appearance test. The same goes for structural glazing at premises in the Highlands and Moray area: building work that materially affects the external appearance needs planning permission, and a true like-for-like usually doesn't. Ask the council to confirm the position for your site.

How much does structural glazing cost in the Highlands and Moray?

Our guide band is £950 to £1,850 plus VAT per m². Scope is the biggest lever, so a tighter brief for structural glazing brings the figure down faster than any change of detail.

Highlands and Moray at a glance
AreaHighlands and Moray
NationScotland
Towns covered5
Main townInverness
Planning regimeScotland: 1997 Planning Act and the 1984 Advertisement Regulations
Building approvalBuilding warrant (Technical Handbook)
SurveyBy arrangement

Does The Highland Council publish shopfront guidance?

Yes, Shopfront Design Guide: Planning Guidance (2018). It tells applicants what the council expects from new and altered shopfronts. A few of the things it asks for:

  • Stallrisers should be at least 400mm high, and glazing to ground level is generally not acceptable on traditional shopfronts.
  • Fascias must not be internally lit or span more than one building, and lettering should fill no more than two-thirds of the fascia.
  • Solid shutters are not supported, and external retractable shuttering is unlikely to be acceptable in conservation areas or on listed buildings.

Read our summary of the Highland guidance

Questions about structural glazing in the Highlands and Moray

Can large glass reach premises on a narrow street in the Highlands and Moray?

Often, yes, though pane size may need to change. We measure the street, the kerb and any overhead obstructions at survey, then size the glass around what a lifter can reach.

Can structural glazing be fitted while a business around Inverness stays open?

Often, with a carefully agreed sequence. Lifts usually happen when the street is quiet, and closed-day or out-of-hours installation can be arranged. A temporary screen keeps the interior secure and dry until the glass is in.

Do you work with structural engineers on jobs around Inverness?

Yes, an engineer's calculations form part of this work. If your project already has one, we supply glass and fixing data for their review, and if it does not, the engineering can be included in the quotation.

Does a shop sign in the Highlands and Moray area need advertisement consent?

Not always. Scotland's 1984 Regulations let an unlit sign within Class IV(1) go up without an application, and Class VI does the same for a lit sign with each character lit from within. Class VI isn't available in conservation areas, and one council says lit signs always need express consent, so ask first.

Do roller shutters need planning permission in the Highlands and Moray area?

Usually yes, if they materially affect the external appearance. Class 9A doesn't name shutters, so in Scotland treat them as falling to the appearance test rather than assuming a permitted development route. Ask the council before ordering, as this is a reading of the rules and not an official statement.

Planning structural glazing in the Highlands and Moray?

Send the address and a photo, and we'll arrange a survey.

Call usGet a guide price