0800 088 6248 Get a guide price
  1. Home
  2. Services
  3. Aluminium shopfronts
  4. Highlands and Moray

Aluminium shopfronts in the Highlands and Moray

A measured survey and scale drawings for premises in the Highlands and Moray.

Few businesses can shut for a week, so any time on site for aluminium shopfronts in the Highlands and Moray is planned around the hours you trade. Closed-day or out-of-hours installation can be arranged.

Your frontage is read alongside its neighbours, so we note the fascia line, stallriser height and pilasters on either side before drawing aluminium shopfronts for the Highlands and Moray premises. Matching those lines or breaking them on purpose can both work, whereas doing it by accident never does.

Dark bronze aluminium shopfront with slim frames, a low stallriser and a glazed entrance door

What should you settle before committing to aluminium shopfronts in the Highlands and Moray?

If your premises in the Highlands and Moray face the sea or a main road, the finish plan changes before the colour does. Salt and traffic film are harder on a coating, so we'd look at pre-treatment, fixings and a realistic cleaning routine from the first drawing.

Large panes set the logistics for any aluminium front in the Highlands and Moray. We look at where a glass vehicle can stop, how far the panes must be carried and whether a lifting aid will fit, because a 3m sheet that can't reach the opening on the day is a wasted trip.

What consents apply to aluminium shopfronts in the Highlands and Moray?

Section 26 of the Town and Country Planning (Scotland) Act 1997 sets the test: work that doesn't materially affect the external appearance isn't development. For aluminium shopfronts at premises in the Highlands and Moray area, anything that does needs planning permission, and a true like-for-like replacement usually doesn't. The council confirms how that applies to each site.

How much do aluminium shopfronts cost in the Highlands and Moray?

We would budget £2,495 to £11,995 plus VAT for a typical 3 to 7 m frontage. Scope sets most of the figure, so a clear brief at the start does more for the budget than any later change of detail.

Highlands and Moray at a glance
AreaHighlands and Moray
NationScotland
Towns covered5
Main townInverness
Planning regimeScotland: 1997 Planning Act and the 1984 Advertisement Regulations
Building approvalBuilding warrant (Technical Handbook)
SurveyBy arrangement

Does The Highland Council publish shopfront guidance?

Yes, Shopfront Design Guide: Planning Guidance (2018). It tells applicants what the council expects from new and altered shopfronts. A few of the things it asks for:

  • Stallrisers should be at least 400mm high, and glazing to ground level is generally not acceptable on traditional shopfronts.
  • Fascias must not be internally lit or span more than one building, and lettering should fill no more than two-thirds of the fascia.
  • Solid shutters are not supported, and external retractable shuttering is unlikely to be acceptable in conservation areas or on listed buildings.

Read our summary of the Highland guidance

Questions about aluminium shopfronts in the Highlands and Moray

Can premises in Inverness be fitted outside trading hours?

Usually, yes. Closed-day or out-of-hours installation can be arranged, and the noisy strip-out is planned first so the rest of the work disturbs neighbours less.

Do you fit aluminium shopfronts across the Highlands and Moray?

Yes. We travel from Great Barr to survey and fit across the Highlands and Moray, using vetted teams working under S&K Glazing with one named contact for the job.

How long would an aluminium shopfront take in the Highlands and Moray?

Typically 2 to 4 weeks to fabricate once drawings are signed off, then 1 to 5 days on site. The programme depends on the opening rather than the postcode, so it is set after the measured survey.

Which way must a fire exit door open on a shop in the Highlands and Moray area?

In the direction of escape. Regulation 13(2) of the Fire Safety (Scotland) Regulations 2006 also rules out sliding and revolving doors on a dedicated fire exit and says fire exit doors can't be locked against immediate use. Duties sit with dutyholders under Part 3 of the Fire (Scotland) Act 2005, meaning the employer and any person with control of the premises.

Do roller shutters need planning permission in the Highlands and Moray area?

Usually yes, if they materially affect the external appearance. Class 9A doesn't name shutters, so in Scotland treat them as falling to the appearance test rather than assuming a permitted development route. Ask the council before ordering, as this is a reading of the rules and not an official statement.

Planning aluminium shopfronts in the Highlands and Moray?

Send the address and a photo, and we'll arrange a survey.

Call usGet a guide price