A heritage shopfront in Pembroke Dock starts with what survives on the building, however little that seems. We record it, draw it and design any new work from that evidence.
Expect us to measure the opening, photograph the existing front and check how materials will reach it on the day, at a time you have agreed.

What goes into getting heritage shopfronts right in Pembroke Dock?
A narrow period front relies on fine detail. For a slim Pembroke Dock unit we'd keep the bars thin and the mouldings small, because anything oversized on a small front looks like a later addition.
Period corner shops often had a canted entrance or a curved pane. If yours did, the floor and ceiling at your Pembroke Dock premises may still show its line, and we'd look for those marks before redesigning the corner.
Where units share one long run of fascia, breaking the height makes you stand out for the wrong reason. If that describes your Pembroke Dock parade, keep the line and win attention with lettering, lighting and what's in the window.
How much could heritage shopfronts in Pembroke Dock cost you?
A sensible starting budget is £8,495 to £24,995 plus VAT for a typical frontage. What shifts the figure is whatever can't be seen yet, such as the condition behind the old frontage or the services running through it.
Which applications might heritage shopfronts in Pembroke Dock involve?
The existing rules still apply in Wales, because most of the Planning (Wales) Act 2026 is waiting for a commencement order. For heritage shopfronts at premises in the Pembroke Dock area, building work that materially affects the external appearance needs planning permission, while a true like-for-like replacement usually doesn't. The council confirms the current position.
For Pembroke Dock, the usual route for planning and advert applications is through Pembrokeshire County Council, and we confirm that when we visit.
| Town | Pembroke Dock |
|---|---|
| Area | Dyfed |
| Postcode districts | SA72 |
| Planning authority | Pembrokeshire County Council |
| Building approval | Building Regulations (Approved Documents for Wales) |
| Distance from Great Barr | About 141 miles |
| Survey | Free for new work |
Questions about heritage shopfronts in Pembroke Dock
How much of my Pembroke Dock shopfront can be kept?
Usually more than it first appears. Decay tends to stay low on posts and doors, while the upper joinery is often sound and can stay.
Can I still have good security on a period front in Pembroke Dock?
Yes. An internal shutter, laminated glass where the frame can carry it and discreet alarm contacts protect the shop without changing how it looks from the street.
Who makes the joinery for Pembroke Dock premises?
Specialist joiners vetted by us and working under S&K Glazing make and fit it. You deal with one named contact, and the contract is with S&K Glazing Limited.
Can a shop fire exit in the Pembroke Dock area use a sliding door?
No, a dedicated fire exit can't be a sliding or revolving door. In Wales, article 14(2) of the Regulatory Reform (Fire Safety) Order 2005 also says fire exit doors must open in the direction of escape and can't be locked against immediate use. The responsible person holds that duty, normally the employer or whoever controls the premises for a business, otherwise the owner.
Can a roller shutter go on a shop in the Pembroke Dock area without planning permission?
Usually not in Wales. Part 42 of the 1995 Order, as inserted in 2014, excludes installing or replacing a security grill or shutter on a shopfront, so the rights for shops don't help. The only way to avoid an application is work that doesn't materially affect the appearance, and the council confirms that.