Across Dyfed, timber is the material we suggest when a building has proportions worth respecting. For Pembroke Dock premises, we set the stallriser, pilasters and fascia from the elevation above, then detail the joinery to match.
A survey in Pembroke Dock usually starts outside, looking at the whole elevation before any tape comes out, because the frontage has to answer the building above it.

How do you design around the building when planning timber shopfronts in Pembroke Dock?
Narrow units suit timber well, because mouldings add interest where there's little width to work with. On a slim Pembroke Dock frontage we'd keep one strong pane, a panelled door and a fascia that doesn't crowd them.
If your Pembroke Dock premises have a deep recessed entrance, timber can make it feel like a welcome. We'd panel the returns, add a lit soffit and lay a hard-wearing threshold, keeping the end grain of every post clear of the wet.
If your Pembroke Dock unit sits in a Victorian parade, the old pilasters usually set the rhythm, so a new front should land on them and not run past them. Keep that line and even a modern frame looks as though it belongs.
What might timber shopfronts cost in Pembroke Dock?
Allow £3,995 to £13,995 plus VAT for a typical frontage. Size and specification set most of that figure for timber shopfronts, and the rest depends on what the survey finds on site.
What permissions should you check for timber shopfronts in Pembroke Dock?
Section 55 of the Town and Country Planning Act 1990 sets the test in Wales: work that doesn't materially affect the external appearance isn't development. Anything that does needs planning permission, and that goes for timber shopfronts at premises in the Pembroke Dock area as much as for a full new frontage. The council confirms how the test applies to your site.
Planning and advert applications for Pembroke Dock premises normally go to Pembrokeshire County Council. We check the position for your address at survey.
| Town | Pembroke Dock |
|---|---|
| Area | Dyfed |
| Postcode districts | SA72 |
| Planning authority | Pembrokeshire County Council |
| Building approval | Building Regulations (Approved Documents for Wales) |
| Distance from Great Barr | About 141 miles |
| Survey | Free for new work |
Questions about timber shopfronts in Pembroke Dock
What should I budget for looking after a timber front in Pembroke Dock?
A repaint every 5 to 7 years, plus a yearly wash and touch-up of the cills. Door gear needs checking too, since seasonal movement can throw a door out of line.
Can a timber front take a modern sign in Pembroke Dock?
Yes. Hand-painted letters suit a timber fascia well, and raised letters or a concealed trough light work too. We draw the sign and the joinery together, so the fixings don't cut through a moulding.
How much disruption will a timber front cause in my Pembroke Dock shop?
Expect more time on site than an aluminium front, typically 3 to 7 days with the painting. Closed-day or out-of-hours fitting can be arranged, and the opening stays boarded and secure between stages.
What access duty applies to a shop in the Pembroke Dock area?
The Equality Act 2010 applies, in Wales as across Great Britain, and it requires reasonable steps to remove, alter or avoid physical features that disadvantage disabled people. The duty is anticipatory, so it covers disabled people generally. A feature that meets a design standard is generally protected for 10 years.
Can a shop fire exit in the Pembroke Dock area use a sliding door?
No, a dedicated fire exit can't be a sliding or revolving door. In Wales, article 14(2) of the Regulatory Reform (Fire Safety) Order 2005 also says fire exit doors must open in the direction of escape and can't be locked against immediate use. The responsible person holds that duty, normally the employer or whoever controls the premises for a business, otherwise the owner.