0800 088 6248 Get a guide price
  1. Home
  2. Services
  3. Heritage shopfronts
  4. Rhondda

Heritage shopfronts in Rhondda

Sightlines, proportion and finish worked out for your Rhondda building.

Good period work in Mid Glamorgan is mostly restraint. For Rhondda premises, that means keeping sound timber, matching mouldings exactly and leaving no sign that a modern hand passed by.

It helps if you can be there when we visit Rhondda, since five minutes walking the frontage together answers more than a long email.

Restored period shopfront with a painted timber fascia, console brackets and a tiled entrance lobby

What goes into getting heritage shopfronts right in Rhondda?

Old joinery doesn't suit rushed night work, though parts of the job do. At Rhondda premises that can't close, we'd carry out noisy removal and glazing out of hours, and leave careful repairs and painting for the day behind a dust screen.

A narrow period front relies on fine detail. For a slim Rhondda unit we'd keep the bars thin and the mouldings small, because anything oversized on a small front looks like a later addition.

If your premises were once two shops, decide early whether the front should read as one or as two. One continuous fascia with a repeated bay width usually settles the elevation better than two mismatched halves, which is worth testing on any Rhondda unit of that kind.

Which applications might heritage shopfronts in Rhondda involve?

Going by Part 42 of the 1995 Order as inserted in 2014, Wales has no permitted development route for changing a shopfront. The right covers A1 and A2 premises, but it excludes creating, altering or replacing a shopfront, or fitting or replacing a security grill or shutter on one, and it doesn't apply on Article 1(5) land. For heritage shopfronts at premises in the Rhondda area, that leaves a planning application, or work that leaves the appearance materially unchanged.

For Rhondda, the usual route for planning and advert applications is through Rhondda Cynon Taf County Borough Council, and we confirm that when we visit.

How much could heritage shopfronts in Rhondda cost you?

We would budget £8,495 to £24,995 plus VAT for a typical frontage. Scope sets most of the figure, so a clear brief at the start does more for the budget than any later change of detail.

Rhondda at a glance
TownRhondda
AreaMid Glamorgan
Postcode districtsCF40, CF41, CF42, CF43
Planning authorityRhondda Cynon Taf County Borough Council
Building approvalBuilding Regulations (Approved Documents for Wales)
Distance from Great BarrAbout 90 miles
SurveyFree for new work

Does Rhondda Cynon Taf County Borough Council publish shopfront guidance?

Yes, Shopfront Design. It tells applicants what the council expects from new and altered shopfronts. A few of the things it asks for:

  • External roller shutters are a last resort after other security options are shown to be unsuitable.
  • Solid metal shutters are unlikely to be acceptable, while lattice or brick-bond grille shutters may be considered.
  • Individual shutters covering only the glazing are one option, and powder coating is generally preferred to paint.

Read our summary of the Rhondda Cynon Taf guidance

Questions about heritage shopfronts in Rhondda

What does a period survey of my Rhondda shop involve?

We measure the front, photograph every detail and check the condition of timber, paint and glass. With your agreement, we may lift a small piece of later boarding to see what survives behind it.

How much of my Rhondda shopfront can be kept?

Usually more than it first appears. Decay tends to stay low on posts and doors, while the upper joinery is often sound and can stay.

How long will restoration take at my Rhondda premises?

New joinery typically takes 8 to 14 weeks to make, then 1 to 3 weeks on site. The survey gives you a realistic programme, because repair-only jobs can take far less.

Does a replacement shopfront in the Rhondda area need Building Regulations approval?

Assume yes until building control says otherwise, because Wales has no like-for-like exemption. Glazing is judged against Approved Document N, as Wales keeps Part N. A registered installer can self-certify replacement windows and doors in non-dwellings, but not structural glass, curtain walling or revolving doors.

Can a shop fire exit in the Rhondda area use a sliding door?

No, a dedicated fire exit can't be a sliding or revolving door. In Wales, article 14(2) of the Regulatory Reform (Fire Safety) Order 2005 also says fire exit doors must open in the direction of escape and can't be locked against immediate use. The responsible person holds that duty, normally the employer or whoever controls the premises for a business, otherwise the owner.

Planning heritage shopfronts in Rhondda?

Send the address and a photo, and we'll come and measure it.

Call usGet a guide price