Design, manufacture, wiring and fitting all sit under one contract for lit signs across Oadby and Leicestershire. Your named contact handles the job from measured survey to first switch-on.
It helps if you can be there when we visit Oadby, since five minutes walking the frontage together answers more than a long email.

What makes illuminated signage work well on Oadby premises?
If an old lightbox is coming down, we check the cable position and the wall behind it before designing the new sign. An existing supply can often be reused, which saves work on the inside.
Where the frontage faces a wide road, face-lit letters can carry further than halo lighting. On a narrower street the softer option usually reads well enough and looks more refined.
If your Oadby unit sits in a Victorian parade, the old pilasters usually set the rhythm, so a new front should land on them and not run past them. Keep that line and even a modern frame looks as though it belongs.
Could illuminated signage in Oadby need planning permission?
Security grilles and shutters are named in England's rules: installing or replacing one on a shopfront sits outside the shop permitted development rights. The frontage itself is treated the same way, so for illuminated signage at premises in the Oadby area, building work that materially affects the appearance needs planning permission. Confirm the position with the council before anything is ordered.
In England, signs at premises in the Oadby area come under the 2007 Advertisement Regulations. An unlit fascia sign generally needs no application under Class 5 of Schedule 3 if it sits on a wall containing a shop window, tops out at 4.6m or the first-floor sill if that is lower, and keeps letters to 0.75m high. Displaying a sign without the consent it needs is a criminal offence, so check before it goes up.
For Oadby, the usual route for planning and advert applications is through Oadby and Wigston Borough Council, and we confirm that when we visit.
How much should you set aside for illuminated signage in Oadby?
Allow £895 to £3,995 plus VAT per sign. Size and specification set most of that figure for illuminated signage, and the rest depends on what the survey finds on site.
| Town | Oadby |
|---|---|
| Area | Leicestershire |
| Postcode districts | LE2 |
| Planning authority | Oadby and Wigston Borough Council |
| Building approval | Building Regulations (Approved Documents) |
| Distance from Great Barr | About 35 miles |
| Survey | Free for new work |
Questions about illuminated signage in Oadby
Will a lit sign in Oadby cost much to run?
Very little. A typical LED sign uses about the same power as a few domestic lamps, and a timer trims that further. Occasional driver changes are the larger long-term cost.
Can you replace a lightbox on my Oadby premises?
Yes. We take the old box down, check the wall and supply behind it, then fit the new sign. Built-up letters will often need a new panel, because the old box leaves a mark on the fascia.
Can an illuminated sign be fitted around trading in Oadby?
Yes. External fitting is usually done from a tower or platform with little effect on the shop, and internal cable work can be arranged out of hours.
Do I need planning permission to change a shopfront in the Oadby area?
Usually yes, if the work materially affects the building's external appearance. England's shop permitted development rights exclude creating, altering or replacing a shopfront, so there is no shortcut. A true like-for-like replacement usually needs no application, and the council confirms the position.
Do I need listed building consent for a shopfront in the Oadby area?
Usually yes, if the building is listed. In England the local planning authority decides, and Historic England is notified of Grade I and II* works and specified Grade II works. Like-for-like repair may not need consent, so ask the council before work starts.