0800 088 6248 Get a guide price
  1. Home
  2. Services
  3. Revolving doors
  4. Bedfordshire

Revolving doors in Bedfordshire

Bedfordshire premises surveyed in person, drawn to scale and priced line by line.

From Luton to the furthest corner of Bedfordshire, the sequence for revolving doors stays the same: survey, drawings, written price, then work on site. We travel from Great Barr in Birmingham and use vetted teams working under S&K Glazing.

Daylight is only half the brief for revolving doors, because a frontage keeps working after dark. Think about how the glass, the sign and the view inside will read to someone walking past at six o'clock on a winter evening.

Glass revolving door with four wings and a bronze-finished canopy at a hotel entrance

How should you approach revolving doors in Bedfordshire?

Measure the floor before falling for the drum. If your building in Bedfordshire is an older one, the slab may fall toward the street, so we check levels across the full diameter and find out what lies beneath before choosing a drive.

Wind is usually the reason to choose a drum. For premises across Bedfordshire, we look at how the entrance is exposed, because a corner that funnels weather into a lobby gains more from a revolving door than a sheltered street does.

What consents apply to revolving doors in Bedfordshire?

A true like-for-like replacement usually needs no planning permission in England, because the external appearance isn't materially affected. New materials, a different glass line or altered proportions usually do count as material, so for revolving doors at premises in the Bedfordshire area, an application is then likely. The council confirms which side of that line a job falls on.

How much do revolving doors cost in Bedfordshire?

A sensible starting budget is £19,995 to £59,995 plus VAT per door. What shifts the figure is whatever can't be seen yet, such as the condition behind the old frontage or the services running through it.

Bedfordshire at a glance
AreaBedfordshire
NationEngland
Towns covered10
Main townLuton
Planning regimeEngland: TCPA 1990 and the 2007 Advertisement Regulations
Building approvalBuilding Regulations (Approved Documents)
SurveyFree for new work, from our Great Barr base

Questions about revolving doors in Bedfordshire

How much notice does a revolving door need for a site in Bedfordshire?

Allow 10 to 16 weeks after sign-off as a typical range, plus about a week on site. Starting early also gives the floor work time to finish.

Will a revolving door cut heating bills at premises in Bedfordshire?

It can, especially on an exposed entrance, because the wings stop through-draughts. The saving depends on footfall and on how the drum compares with the door you have now.

Do you install revolving doors in Bedfordshire?

Yes. We travel from Great Barr to survey the entrance, and the floor, structure and door are coordinated under one contract.

Does a new shopfront in the Bedfordshire area need Building Regulations approval?

Assume yes until building control says otherwise. England has no like-for-like exemption, though registered installers can self-certify replacement windows and doors in non-dwellings. That route doesn't cover structural glass, curtain walling or revolving doors.

What rules apply to a fire exit door through a shopfront in the Bedfordshire area?

It must open in the direction of escape and can't be locked against immediate use, and a dedicated fire exit can't be a sliding or revolving door. In England that comes from article 14(2) of the Regulatory Reform (Fire Safety) Order 2005, and the duty sits with the responsible person, normally the employer or whoever controls the premises for a business, otherwise the owner. An outward door can clash with section 153 of the Highways Act 1980 where it opens onto the footway, so raise it early.

Planning revolving doors in Bedfordshire?

Send the address and a photo, and we'll come and measure it.

Call usGet a guide price