Landlords, shopfitters and architects working in Comber can use the service as a full package or for one difficult detail. Either way the drawings start from a measured survey.
Measuring the opening is the easy part of a survey in Comber. We also look at the beam above, the pavement fall and any meters or drains nearby.

Where should you begin with shopfront design in Comber?
If your brand is new to Comber, we look at how far the guidelines need adapting to this building. A logo may need a different size or layout on a shallow fascia, and that is worth settling early.
If your Comber unit sits in a terrace, we draw the neighbouring frontages on the elevation too. Your design then has to work in context, which is how people will actually see it.
If your premises were once two shops, decide early whether the front should read as one or as two. One continuous fascia with a repeated bay width usually settles the elevation better than two mismatched halves, which is worth testing on any Comber unit of that kind.
What sign-off might you need for shopfront design in Comber?
Northern Ireland appears to have no permitted development route for a shopfront, as its 2015 Order mentions shops only in the Part 4 changes of use. For shopfront work at premises in the Comber area, expect a planning application unless the external appearance isn't materially affected. Ask the council to confirm the position.
Comber applications for planning permission or advertisement consent are normally handled by Ards and North Down Borough Council. Our survey includes a check of the position for your address.
What price should you expect for shopfront design in Comber?
Guide price: £495 to £2,495 plus VAT per frontage. Materials, finish and the amount of drawing and coordination involved all move it, and your itemised quotation shows where the money goes on shopfront design.
| Town | Comber |
|---|---|
| Area | County Down |
| Postcode districts | BT16, BT23 |
| Planning authority | Ards and North Down Borough Council |
| Building approval | Building Control (Technical Booklets) |
| Survey | Free for new work |
Questions about shopfront design in Comber
What do you need from me before designing for my Comber premises?
The address, brand files and a few frontages you admire are a good start. Tell us your rough budget too, because it helps us focus on what can be built.
Do I need a design service for a simple Comber shopfront?
Not always. Every job gets a measured survey and scale drawings anyway. The design service adds options, visuals and a full specification, which pay off when the look matters most.
Will you work with my shopfitter or architect in Comber?
Yes. We share drawings and coordinate the frontage with their ceiling, lighting and display plans. Your named contact stays the route for questions on the frontage.
What rules apply to a fire exit door through a shopfront in the Comber area?
It must open in the direction of escape, it can't be locked against immediate use, and a dedicated fire exit can't be sliding or revolving. In Northern Ireland that comes from regulation 13(2) of the Fire Safety Regulations (Northern Ireland) 2010, and duties sit with dutyholders, meaning the employer and any person with control of the premises, whom the Fire and Rescue Service calls the appropriate person. An outward door may also need Department consent under Article 56 of the Roads (Northern Ireland) Order 1993.
Who decides listed building consent for a shopfront in the Comber area?
The council decides, under section 85 of the Planning Act (Northern Ireland) 2011. The Department for Communities' Historic Environment Division is a statutory consultee on applications. Unauthorised works are a criminal offence, so ask before anything is removed.