Want a new front for your Comber premises? An aluminium frame gives you slim sightlines and a hard-wearing finish in any RAL colour, proportioned to the building rather than picked from a range.
Bring whatever you have to the survey in Comber: brand guidelines, lease plans, old drawings or a photo of a frontage you admire.

What makes aluminium shopfronts work well on Comber premises?
If your unit sits in a parade in Comber, we'd start with the neighbours: the fascia line, cill height and pier rhythm of the row. Holding those lines lets a slimmer section stand out for the right reasons, rather than fighting everything beside it.
A narrow Comber unit gains from fewer parts. Under about 4m wide, we'd offset the door and use one large pane rather than a central door with two slivers of glass either side, which makes the front feel wider than it measures.
Where the building has good brick or stone around the opening, set the frame back in the reveal so the masonry can be seen. On Comber premises with a flat elevation, that deep reveal throws a shadow line that adds real depth in low sun.
How much should you set aside for aluminium shopfronts in Comber?
The guide for aluminium shopfronts is £2,495 to £11,995 plus VAT for a typical 3 to 7 m frontage. Expect the lower end for simple work with clear access, and the upper end where detail, finish or awkward conditions add hours.
Could aluminium shopfronts in Comber need planning permission?
Northern Ireland appears to have no permitted development route for a shopfront, as its 2015 Order mentions shops only in the Part 4 changes of use. For aluminium shopfronts at premises in the Comber area, expect a planning application unless the external appearance isn't materially affected. Ask the council to confirm the position.
We confirm the position at survey, because a boundary or a special designation can change who handles the file, but applications from Comber premises normally go to Ards and North Down Borough Council.
| Town | Comber |
|---|---|
| Area | County Down |
| Postcode districts | BT16, BT23 |
| Planning authority | Ards and North Down Borough Council |
| Building approval | Building Control (Technical Booklets) |
| Survey | Free for new work |
Questions about aluminium shopfronts in Comber
Who carries out the work in Comber?
Vetted teams working under S&K Glazing carry it out, with one named contact from survey to handover. The contract is with S&K Glazing Limited, and we travel to Comber from Great Barr.
Can you match a shopfront I like elsewhere in County Down?
Usually, yes. Send the photo and address, and we'll work out the section, colour and proportions behind it, then adapt them to your Comber opening.
Will an aluminium front make my Comber shop warmer?
It can, though the glass matters more than the frame. A thermally broken section with double-glazed units loses less heat than single glazing, and a well-sealed door is often the change you notice most on a cold day.
Does the Disability Discrimination Act apply to a shop entrance in the Comber area?
Yes. The Disability Discrimination Act 1995 applies in Northern Ireland, and section 21 deals with physical features that make a service hard for disabled people to use. Regulations made in 2007 (SR 2007/473) add detail on features, third-party consent and design standards.
Do I need planning permission to change a shopfront in the Comber area?
Usually yes, when the work materially affects the external appearance. Northern Ireland's 2015 Order appears to offer no permitted development route for a shopfront. The council confirms the position, and a true like-for-like replacement usually needs no application.