Underneath a dated frontage there may be something worth saving. Where Clarkston premises have been overclad, we look behind the panels before anything is ordered.
It helps if you can be there when we visit Clarkston, since five minutes walking the frontage together answers more than a long email.

How would we approach shopfront refurbishment for your Clarkston premises?
If your Clarkston shopfront is aluminium and the frame is sound, a recoat can change the whole look. We check for corrosion and old sealant first, because paint will not hide either for long.
Where budget is the limit, we rank the work by what people see first. The fascia, the door and the lower part of the frontage usually matter most, and the rest can follow as a second stage.
If your premises were once two shops, decide early whether the front should read as one or as two. One continuous fascia with a repeated bay width usually settles the elevation better than two mismatched halves, which is worth testing on any Clarkston unit of that kind.
What should you budget for shopfront refurbishment in Clarkston?
Allow £1,995 to £8,995 plus VAT depending on what is kept. Size and specification set most of that figure for shopfront refurbishment, and the rest depends on what the survey finds on site.
What consents could affect shopfront refurbishment in Clarkston?
Section 26 of the Town and Country Planning (Scotland) Act 1997 sets the test: work that doesn't materially affect the external appearance isn't development. For shopfront refurbishment at premises in the Clarkston area, anything that does needs planning permission, and a true like-for-like replacement usually doesn't. The council confirms how that applies to each site.
For Clarkston, the usual route for planning and advert applications is through East Renfrewshire Council, and we confirm that when we visit.
| Town | Clarkston |
|---|---|
| Area | Glasgow and Clyde |
| Postcode districts | G44, G45, G46, G76 |
| Planning authority | East Renfrewshire Council |
| Building approval | Building warrant (Technical Handbook) |
| Distance from Great Barr | About 243 miles |
| Survey | Free for new work |
Questions about shopfront refurbishment in Clarkston
Can you refurbish just the sign and door on my Clarkston frontage?
Yes. A new sign and door gear can make a big difference on their own. We would look at how they sit with the frame and suggest a colour to tie them together.
What if you find more damage on my Clarkston premises?
We stop, photograph it and show you the cost before going further. Nothing extra goes ahead without your agreement.
Can a refurbishment make my Clarkston premises easier to enter?
Often, yes. Lighter door closers, better handles and a lower threshold can all be added without replacing the frontage. We check the door width and the step at survey.
Which way must a fire exit door open on a shop in the Clarkston area?
In the direction of escape. Regulation 13(2) of the Fire Safety (Scotland) Regulations 2006 also rules out sliding and revolving doors on a dedicated fire exit and says fire exit doors can't be locked against immediate use. Duties sit with dutyholders under Part 3 of the Fire (Scotland) Act 2005, meaning the employer and any person with control of the premises.
Do roller shutters need planning permission in the Clarkston area?
Usually yes, if they materially affect the external appearance. Class 9A doesn't name shutters, so in Scotland treat them as falling to the appearance test rather than assuming a permitted development route. Ask the council before ordering, as this is a reading of the rules and not an official statement.