A well-made timber front should still look good in Crystal Palace long after the first coat of paint has gone. That comes from choosing a durable timber, sealing the end grain and keeping water away from the bottom of every member.
Bring whatever you have to the survey in Crystal Palace: brand guidelines, lease plans, old drawings or a photo of a frontage you admire.

What goes into getting timber shopfronts right in Crystal Palace?
Timber fits a night programme better than you'd think, since most of the joinery is made elsewhere. For a unit in Crystal Palace that can't close by day, we'd fit the frame in stages at night and leave painting until the end, once the dust has gone.
Narrow units suit timber well, because mouldings add interest where there's little width to work with. On a slim Crystal Palace frontage we'd keep one strong pane, a panelled door and a fascia that doesn't crowd them.
If the pavement falls across your frontage, let the stallriser take up the slope and keep the glass line dead level. The eye reads the long horizontal, so Crystal Palace premises on a slope look settled once that line is true.
How much could timber shopfronts in Crystal Palace cost you?
Our guide band is £3,995 to £13,995 plus VAT for a typical frontage. Scope is the biggest lever, so a tighter brief for timber shopfronts brings the figure down faster than any change of detail.
Which applications might timber shopfronts in Crystal Palace involve?
For timber shopfronts at premises in the Crystal Palace area, the deciding question in England is whether the building work materially affects the external appearance. If it does, planning permission is needed, while a true like-for-like replacement usually needs none. The council confirms the position for each site.
At survey we check how things stand for your building, although applications for planning permission or advertisement consent here normally go to London Borough of Bromley.
| Town | Crystal Palace |
|---|---|
| Area | Greater London |
| Postcode districts | SE19, SE20, SE26, SE27 |
| Planning authority | London Borough of Bromley |
| Building approval | Building Regulations (Approved Documents) |
| Distance from Great Barr | About 110 miles |
| Survey | Free for new work |
Questions about timber shopfronts in Crystal Palace
Do you make the joinery for Crystal Palace shops to order?
Yes. Every length is made to the signed-off drawings for your opening, then brought to Crystal Palace from Great Barr by vetted teams working under S&K Glazing.
Can a timber front take a modern sign in Crystal Palace?
Yes. Hand-painted letters suit a timber fascia well, and raised letters or a concealed trough light work too. We draw the sign and the joinery together, so the fixings don't cut through a moulding.
Can you fit a timber front around existing tiles in Crystal Palace?
Often, yes, and it's usually worth trying. If your stallriser or entrance has good original tile, we'd measure it carefully and scribe the new joinery to it.
What rules apply to a fire exit door through a shopfront in the Crystal Palace area?
It must open in the direction of escape and can't be locked against immediate use, and a dedicated fire exit can't be a sliding or revolving door. In England that comes from article 14(2) of the Regulatory Reform (Fire Safety) Order 2005, and the duty sits with the responsible person, normally the employer or whoever controls the premises for a business, otherwise the owner. An outward door can clash with section 153 of the Highways Act 1980 where it opens onto the footway, so raise it early.
Do I need planning permission to change a shopfront in the Crystal Palace area?
Usually yes, if the work materially affects the building's external appearance. England's shop permitted development rights exclude creating, altering or replacing a shopfront, so there is no shortcut. A true like-for-like replacement usually needs no application, and the council confirms the position.