Colour and craft do the work on a timber front in Featherstone. We test paint on your actual frontage, draw any moulding that matters at full size, and keep every dimension on paper for you to sign off.
It helps if you can be there when we visit Featherstone, since five minutes walking the frontage together answers more than a long email.

What should you think about before commissioning timber shopfronts in Featherstone?
Narrow units suit timber well, because mouldings add interest where there's little width to work with. On a slim Featherstone frontage we'd keep one strong pane, a panelled door and a fascia that doesn't crowd them.
Timber fits a night programme better than you'd think, since most of the joinery is made elsewhere. For a unit in Featherstone that can't close by day, we'd fit the frame in stages at night and leave painting until the end, once the dust has gone.
If your Featherstone unit sits in a Victorian parade, the old pilasters usually set the rhythm, so a new front should land on them and not run past them. Keep that line and even a modern frame looks as though it belongs.
What is a realistic budget for timber shopfronts in Featherstone?
We would budget £3,995 to £13,995 plus VAT for a typical frontage. Scope sets most of the figure, so a clear brief at the start does more for the budget than any later change of detail.
Who approves timber shopfronts in Featherstone?
A true like-for-like replacement usually needs no planning permission in England, because the external appearance isn't materially affected. New materials, a different glass line or altered proportions usually do count as material, so for timber shopfronts at premises in the Featherstone area, an application is then likely. The council confirms which side of that line a job falls on.
Planning and advert applications for Featherstone premises normally go to South Staffordshire Council. We check the position for your address at survey.
| Town | Featherstone |
|---|---|
| Area | Staffordshire |
| Postcode districts | WS6, WV10, WV11, WV9 |
| Planning authority | South Staffordshire Council |
| Building approval | Building Regulations (Approved Documents) |
| Distance from Great Barr | About 10 miles |
| Survey | Free for new work |
Questions about timber shopfronts in Featherstone
Will timber suffer on my Featherstone frontage if it gets a lot of rain?
Not if the details are right. Sloped cills, sealed end grain and plinth blocks keep water moving, and the paint system then only has to deal with the weather, not trapped damp.
Can you fit a timber front around existing tiles in Featherstone?
Often, yes, and it's usually worth trying. If your stallriser or entrance has good original tile, we'd measure it carefully and scribe the new joinery to it.
What should I budget for looking after a timber front in Featherstone?
A repaint every 5 to 7 years, plus a yearly wash and touch-up of the cills. Door gear needs checking too, since seasonal movement can throw a door out of line.
Do roller shutters need planning permission in the Featherstone area?
Usually yes. Installing or replacing a security grill or shutter on a shopfront is expressly outside England's shop permitted development rights, so the only way to avoid an application is work that doesn't materially affect the appearance. Ask the council before ordering.
Does the Equality Act apply to a shop entrance in the Featherstone area?
Yes. The Equality Act 2010 applies in England, as across Great Britain, and it requires reasonable steps to remove, alter or avoid physical features that disadvantage disabled people. The duty is anticipatory, so it looks at disabled people generally, and a new Services Code replaced the 2011 Code on 5 August 2026.