Seen a frontage you admire? Bring the picture to our first talk about timber shopfronts in Kent, and we will work out what makes it succeed, from fascia depth to glass line, and what that means for your building.
Most frontages share something with someone, be that a door to the flats above, a meter cupboard or a pilaster on the boundary. We pick those up early on timber shopfronts in Kent, because they are far easier to design around than to discover on the day.

Where do you start with timber shopfronts in Kent?
Timber is a natural fit for food and drink. For a restaurant or bar in Maidstone, we'd design opening sashes or a serving hatch into the front, so the joinery earns its keep in summer and closes up snugly in winter.
Joinery arrives close to finished, so handling matters. We look at how long lengths of cornice and frame can reach an address in Kent, and break them at joints we can hide if the route is tight.
What consents apply to timber shopfronts in Kent?
Security grilles and shutters are named in England's rules: installing or replacing one on a shopfront sits outside the shop permitted development rights. The frontage itself is treated the same way, so for timber shopfronts at premises in the Kent area, building work that materially affects the appearance needs planning permission. Confirm the position with the council before anything is ordered.
How much do timber shopfronts cost in Kent?
Until the survey is done, plan on £3,995 to £13,995 plus VAT for a typical frontage. Unusual sizes, fine detail and phased working push the figure up, while a simple brief and clear access keep it toward the lower end.
| Area | Kent |
|---|---|
| Nation | England |
| Towns covered | 31 |
| Main town | Maidstone |
| Planning regime | England: TCPA 1990 and the 2007 Advertisement Regulations |
| Building approval | Building Regulations (Approved Documents) |
| Survey | Free for new work, from our Great Barr base |
Does Canterbury City Council publish shopfront guidance?
Yes, Shopfront design Supplementary Planning Document (2020). It tells applicants what the council expects from new and altered shopfronts. A few of the things it asks for:
- Fascia depth must not exceed the depth of the console, or one-fifth of the distance from console to pavement.
- External solid roller shutters are not normally supported in conservation areas or main shopping streets and are unacceptable on listed buildings.
- Internally lit box signs, illuminated letters and window neon are unsuitable in conservation areas, with external lighting only for premises open at night.
Questions about timber shopfronts in Kent
Who looks after a timber shopfront in Kent once it is fitted?
Any good decorator can, working to the paint reference on your drawings. Keep a note of each repaint, as it makes future work far easier to plan.
How far ahead should we plan a timber front in Kent?
Allow typically 4 to 8 weeks for making after sign-off, then around a week on site. A winter fit needs extra margin for paint drying.
Do you make timber shopfronts for premises in Kent?
Yes. Each front is drawn and made to a measured survey, and we travel from Great Barr to fit it, with one named contact throughout.
Do I need listed building consent for a shopfront in the Kent area?
Usually yes, if the building is listed. In England the local planning authority decides, and Historic England is notified of Grade I and II* works and specified Grade II works. Like-for-like repair may not need consent, so ask the council before work starts.
Does a shop sign in the Kent area need advertisement consent?
Not always. In England, an unlit sign within Class 5 of the 2007 Advertisement Regulations generally needs no application, and neither does a lit sign within Class 4B. Anything outside those classes needs consent, and Class 4B isn't available in conservation areas, so check before ordering.