A well-made timber front should still look good in Woolwich long after the first coat of paint has gone. That comes from choosing a durable timber, sealing the end grain and keeping water away from the bottom of every member.
Measuring the opening is the easy part of a survey in Woolwich. We also look at the beam above, the pavement fall and any meters or drains nearby.

What goes into getting timber shopfronts right in Woolwich?
In a parade of mixed fronts in Woolwich, painted timber can lift a unit without shouting. We'd take the height of the neighbouring cills and fascias, then let the depth of the mouldings and a considered colour do the talking.
Narrow units suit timber well, because mouldings add interest where there's little width to work with. On a slim Woolwich frontage we'd keep one strong pane, a panelled door and a fascia that doesn't crowd them.
If there are storeys above the shop, the frontage should feel like the base of the building and not a sign stuck on it. Lining up mullions with the windows overhead is a small move that settles the whole elevation at Woolwich premises.
Which applications might timber shopfronts in Woolwich involve?
For timber shopfronts at premises in the Woolwich area, the deciding question in England is whether the building work materially affects the external appearance. If it does, planning permission is needed, while a true like-for-like replacement usually needs none. The council confirms the position for each site.
We confirm the position at survey, because a boundary or a special designation can change who handles the file, but applications from Woolwich premises normally go to Royal Borough of Greenwich.
How much could timber shopfronts in Woolwich cost you?
Our guide band is £3,995 to £13,995 plus VAT for a typical frontage. Scope is the biggest lever, so a tighter brief for timber shopfronts brings the figure down faster than any change of detail.
| Town | Woolwich |
|---|---|
| Area | Greater London |
| Postcode districts | SE18 |
| Planning authority | Royal Borough of Greenwich |
| Building approval | Building Regulations (Approved Documents) |
| Distance from Great Barr | About 111 miles |
| Survey | Free for new work |
Questions about timber shopfronts in Woolwich
Can you fit a timber front around existing tiles in Woolwich?
Often, yes, and it's usually worth trying. If your stallriser or entrance has good original tile, we'd measure it carefully and scribe the new joinery to it.
Can a timber front take a modern sign in Woolwich?
Yes. Hand-painted letters suit a timber fascia well, and raised letters or a concealed trough light work too. We draw the sign and the joinery together, so the fixings don't cut through a moulding.
Can you copy a timber shopfront I've seen in Greater London?
We can work from your photo and borrow what makes it succeed, including proportions, moulding sizes and colour. The front is then drawn to your own Woolwich opening.
Does a shop sign in the Woolwich area need advertisement consent?
Not always. In England, an unlit sign within Class 5 of the 2007 Advertisement Regulations generally needs no application, and neither does a lit sign within Class 4B. Anything outside those classes needs consent, and Class 4B isn't available in conservation areas, so check before ordering.
Does a new shopfront in the Woolwich area need Building Regulations approval?
Assume yes until building control says otherwise. England has no like-for-like exemption, though registered installers can self-certify replacement windows and doors in non-dwellings. That route doesn't cover structural glass, curtain walling or revolving doors.