A frontage is the one part of your premises everyone sees, including people who never come in. Our work across Hampshire treats it that way, with fascia, glass, stallriser and door drawn as one composition.
Material is usually the first decision. Powder-coated aluminium gives slim lines in almost any colour, timber suits older buildings and deep mouldings, and frameless glass keeps the view inside clear, so we start by asking what your building in Hampshire can carry well.

What consents apply to shopfronts in Hampshire?
England has no permitted development route for changing a shopfront. Part 7 Class A of the General Permitted Development Order 2015 excludes creating, altering or replacing one, and it allows no alterations at all on article 2(3) land. That leaves two outcomes for shopfront work at premises in the Hampshire area: a planning application, or work that doesn't materially affect the external appearance.
Lighting moves a sign out of Class 5 in England, because that class allows illumination only for medical-type notices. Class 4B then applies at premises in the Hampshire area: halo or character-only lighting, static, with the lowest part at least 2.5m up. Brightness is capped at 600 cd/m² on signs up to 10m² and 300 cd/m² above that, and anything outside these limits needs advertisement consent.
Which rules apply to buildings in Hampshire?
Conservation area consent ended in England in 2013. In the Hampshire area, as elsewhere in the country, demolition in a conservation area now goes through planning permission from the local planning authority. If the building is also listed, listed building consent is a separate application.
At premises in the Hampshire area, glass follows Approved Document K of England's Building Regulations guidance. Glazing in critical locations needs safe breakage to BS EN 12600 Class 3, or Class 2 for door panes over 900mm wide, and manifestation goes at 850mm to 1000mm and 1400mm to 1600mm above the floor. Powered doors must not trap people and must open if the power fails.
| Area | Hampshire |
|---|---|
| Nation | England |
| Towns covered | 33 |
| Main town | Southampton |
| Planning regime | England: TCPA 1990 and the 2007 Advertisement Regulations |
| Building approval | Building Regulations (Approved Documents) |
What can we fit in Hampshire?
- Aluminium shopfronts
from £2,495 plus VAT - Frameless glass shopfronts
from £4,995 plus VAT - Timber shopfronts
from £3,995 plus VAT - Bi-folding shopfronts
from £5,195 plus VAT - Heritage shopfronts
from £8,495 plus VAT - Bronze and metal shopfronts
from £7,995 plus VAT - Curved glass shopfronts
from £6,995 plus VAT - Automatic sliding doors
from £3,895 plus VAT - Frameless glass doors
from £1,495 plus VAT - Revolving doors
from £19,995 plus VAT - Accessible entrances
from £995 plus VAT - Curtain walling
from £550 plus VAT per m² - Structural glazing
from £950 plus VAT per m² - Stallrisers and cladding
from £195 plus VAT per m² - Fascia signage
from £395 plus VAT - Illuminated signage
from £895 plus VAT - Projecting signs
from £395 plus VAT - Canopies and awnings
from £1,495 plus VAT - Perforated roller shutters
from £1,695 plus VAT - Security glazing
from £195 plus VAT per m² - Shopfront design service
from £495 plus VAT - Planning and consents
from £395 plus VAT - Multi-site rollouts
Priced per estate - Shopfront refurbishment
from £1,995 plus VAT
Questions about shopfronts in Hampshire
Do you offer repairs in Hampshire?
Repairs run as paid call-outs, separate from surveys for new work. A shopfront repair call-out is £165 plus VAT for attendance and the first hour, so check with us that your address is covered before you book.
Can you match an existing frontage in Hampshire?
Usually, yes. Colours, profiles and proportions can all be matched closely once we have measured them, although an aged finish rarely matches a new one on day one, so we show you samples first.
Can a tenant in Hampshire commission a new shopfront?
Yes, tenants can commission us directly. Your landlord will probably want to see the proposal first, so our scale drawings are prepared to be passed on.
Does a shop sign in the Hampshire area need advertisement consent?
Not always. In England, an unlit sign within Class 5 of the 2007 Advertisement Regulations generally needs no application, and neither does a lit sign within Class 4B. Anything outside those classes needs consent, and Class 4B isn't available in conservation areas, so check before ordering.
Does a new shopfront in the Hampshire area need Building Regulations approval?
Assume yes until building control says otherwise. England has no like-for-like exemption, though registered installers can self-certify replacement windows and doors in non-dwellings. That route doesn't cover structural glass, curtain walling or revolving doors.
Does the Equality Act apply to a shop entrance in the Hampshire area?
Yes. The Equality Act 2010 applies in England, as across Great Britain, and it requires reasonable steps to remove, alter or avoid physical features that disadvantage disabled people. The duty is anticipatory, so it looks at disabled people generally, and a new Services Code replaced the 2011 Code on 5 August 2026.