You usually need planning permission if the work materially affects the external appearance of the building, and we found no permitted development route for changing a shopfront in any UK nation. A true like-for-like replacement usually doesn't need an application. The council decides what is material, so ask it to confirm before anything is ordered.

Do I need planning permission to change my shopfront?
Yes, if the change materially affects the external appearance, and that test is worded the same way in all four nations. Works that leave the appearance materially unchanged aren't treated as development at all, which is where a true like-for-like replacement sits.
Permitted development gives shops in England, Wales and Scotland some freedom for small alterations, but not for the front itself. England and Wales exclude creating, altering or replacing a shop front, Scotland excludes work that alters or extends beyond the existing front, and we found no route in Northern Ireland. The result is that the appearance test is the only way to avoid an application. This is general information and the council's view is the one that counts.
| Nation | Appearance test | Permitted development for the shop front |
|---|---|---|
| England | TCPA 1990 s.55(2)(a)(ii) | None: GPDO 2015 Sch 2 Pt 7 Class A excludes it |
| Wales | Same s.55, pending the Planning (Wales) Act 2026 | None: GPDO 1995 Pt 42 Class A has the same exclusions |
| Scotland | 1997 Act s.26(2)(a)(ii) | None: GPDO 1992 Class 9A excludes altering the front |
| Northern Ireland | 2011 Act s.23(3)(a) | No route found in GPDO 2015 |
What counts as a like-for-like shopfront replacement?
A like-for-like replacement matches the existing frontage so closely that a passer-by would see no real change: same material, same proportions, same lines. Scottish guidance says like-for-like windows need no permission, and the other nations rely on the same test, so the principle travels even if that wording doesn't.
Small-looking changes often take a job out of that category. Swapping timber for aluminium is one, and so is moving the door, removing a recessed lobby, raising the stallriser or deepening the fascia. Replacing a framed front with frameless glass almost always counts, as the whole character of the frontage changes.
Photograph the old front square-on before it comes out, with a tape or a known dimension in shot. If anyone later questions whether the new work matches, that evidence will matter far more than a recollection. Ask the council for its view in writing if the point is finely balanced, because a verbal yes across a counter is hard to rely on.
What does a planning officer look at?
An officer looks at how the new front relates to the whole building and the street, more than at the glass itself. The usual questions concern proportion: does the fascia sit below the first-floor cills, do the pilasters line through, and is the stallriser a sensible height?
Door position and access come next, followed by materials, colour and how much of any older frontage survives. Many councils publish a shopfront design guide, and reading yours before drawing anything can save a round of revisions. Deep fascias that hide a suspended ceiling are a common objection, so it is worth solving the ceiling inside the shop and keeping the fascia in proportion. Dropping a ceiling back from the glass by a metre or so, with a neat bulkhead, usually does the job.
Upper floors matter more than most applicants expect. A shopfront is the base of the whole elevation, so an officer will often judge it by standing across the road and looking at the building as one composition. If a run of neighbouring units share a fascia line or cornice, breaking that line is hard to defend, however good your own design is.
What does a shopfront planning application need?
A shopfront application normally needs a location plan, existing and proposed elevations, a floor plan and a section through the fascia, glass and stallriser. Each council sets out its own validation list, so check that first. Good sections do the persuading, since they show the officer the depth of the reveal and how the fascia meets the wall.
Allow for consent in the programme: 4 to 8 weeks is a typical range. Everything should be held until the decision arrives, and that includes glass orders, because a condition on the colour or the fascia depth can change the drawing. We prepare and submit the application as part of the job, at £395 to £1,295 plus VAT per application, plus the council's fee.
How much is the planning fee for a shopfront?
The fee is typically in the low hundreds of pounds, and it differs by nation. No schedule names shopfronts, so the figures below are the closest category for an alteration with no new floorspace, and your council confirms the amount.
Fees change often. Wales has a further rise due on 1 April 2027, and we found no 2026 update for Northern Ireland, so check before you budget. A sign usually needs its own advertisement application with its own fee, which our sign guide lists separately.
| Nation | Closest fee | Category | From |
|---|---|---|---|
| England | £309 | Alteration, no increase in floor space | 1 April 2026 |
| Wales | £383 | No increase, up to 40m² | 1 December 2025 |
| Scotland | £371 | Category 4, no new floorspace, up to 50m² | 1 April 2026 |
| Northern Ireland | £220 | Category 5, no new floorspace | 1 April 2025 |
What other consents might a new shopfront need?
Planning is usually one consent among several, and signs, listed status and building regulations are each assessed separately. A new fascia sign has its own regime, so a planning approval for the shopfront doesn't by itself approve a lit sign above it.
Shutters are expressly outside permitted development in England and Wales, and in Scotland and Northern Ireland we would treat them under the appearance test. Bi-folding fronts have no specific class, so treat them as altering a shop front. Ramps have no specific class either, while Class A and Class 9A exclude raised platforms over 0.3m.
Changing a frontage doesn't by itself change the use class, on our reading, although a ground-floor display window can matter for some A2 to A1 changes in Northern Ireland and Wales. Listed buildings need listed building consent as well, and building regulations apply whatever the planning answer is.
Common questions
Do the rules differ between councils?
The legal test is set nationally, but each council applies its own design policies and conservation guidance. Two neighbouring councils can take different views of the same fascia, so always read the local guide.
Who applies, the tenant or the owner?
Tenants often apply themselves, though the lease may say who must apply and who pays. The council's form will tell you what it needs about ownership, and the landlord's consent is a separate matter.
Does repainting a shopfront need planning permission?
Repainting in a similar colour usually won't materially affect appearance. A striking change of colour might, and a listed building or a conservation area raises the stakes, so ask the council first.
Has the Planning (Wales) Act 2026 changed the rules?
Not yet in practice. It had Royal Assent on 27 April 2026, but most of it awaits a commencement order, so the existing Welsh rules still apply for now.