The strongest shutter-free approach combines laminated glass, a reinforced door with multi-point locking, an internal grille and well-fixed frames. Laminated glass isn't burglar proof, but it delays entry, and delay is what security buys. Ratings such as BS EN 356, BS EN 1627, PAS 24 and LPS 1175 tell you what a product has been tested to, and the certificate comes with the product where that applies.

How do I secure a shopfront without external shutters?
Work in layers: glass that holds, a door and frame that resist force, and a grille or safe storage behind them. No single product stops a determined attack. The aim is to make getting in slow and noisy, so that someone gives up or runs out of time before they reach anything worth taking.
Start with an honest view of the risk. A jeweller, a phone shop and a florist face very different threats, and a good specification reflects what is actually on display at night. Your insurer may have a view too, so ask before ordering.
The table links each layer to the reference worth asking about. Those references describe what has been tested, and you should ask to see that the test covers the same assembly being fitted to your shop.
| Layer | Typical measure | Reference to ask about |
|---|---|---|
| Glass | Laminated security glass | BS EN 356 |
| Door set | Reinforced frame, multi-point locks | PAS 24 or BS EN 1627 |
| Frame | Internal beads, close fixing centres | BS EN 1627 |
| Inside | Internal grille or lattice | BS EN 1627 or LPS 1175 |
Is laminated glass burglar proof?
No. Laminated glass can be broken through with enough time and effort, but the interlayer keeps the pane in the frame and forces an attacker to work at it. BS EN 356 classifies security glazing by its resistance to manual attack, with classes such as P6B, and the class tells you far more than the thickness does.
Fitting matters as much as the sheet. Good glass held by external beads can simply be pushed out as a panel, so beads belong on the inside, with a deep edge cover and proper glazing tape. A rated pane in a flimsy frame only moves the weak point a few millimetres.
Expect to pay £195 to £495 plus VAT per m² of glass. Laminate adds weight, so check the frame can carry it, especially if you are re-glazing an older front. Laminated panes also damp sound a little, which is a pleasant side benefit on a noisy road.
What is PAS 24 and do I need it?
PAS 24:2022 is a British specification for enhanced security in doorsets and windows, written for dwellings and for other buildings exposed to comparable risk. We know of no general legal requirement for a shop to have it, though an insurer or landlord may ask, and it gives a useful baseline for a door on a quiet back street.
BS EN 1627:2021 goes wider, classifying burglar resistance across doorsets, windows, curtain walling, grilles and shutters. LPS 1175, now at Issue 8.2, is the Loss Prevention Certification Board's intruder resistance standard, and a rating such as B3 combines a tool category with a delay in minutes. Both are worth raising if you have high-value stock.
All of these ratings belong to the tested assembly. Swap the lock, the glass or the fixings and the rating may no longer apply, so keep to what the certificate describes. PAS 24 and several other standards are under review, so check the current edition when you order.
Where are shopfronts usually weakest?
The door is usually the weakest point, and the meeting edge of a pair of doors is often the worst of it. A single central lock on two glazed leaves leaves plenty of give at the top and bottom, and a bar can open that gap. Multi-point locks with hooks or shoot bolts at head and foot make a large difference.
Lock cylinders can be attacked directly, so ask for anti-snap protection and a guard plate. Exposed hinges want dog bolts on the hinge side. A frameless door on floor springs usually relies on a single lock in a bottom rail, which is why it suits a site where other measures carry the load.
Look beyond the glass as well. Old timber frames fixed with a few long screws can be levered out as a unit, and an unused letterbox gives a tool somewhere to start. Check the back door too, since it often has none of the attention lavished on the front.
How does an internal grille work?
An internal grille sits behind the glass and stops anyone reaching the stock, even after the pane has gone. It can be a rolling lattice, a sliding folding gate or a fixed screen, and it leaves the frontage looking open to the street after hours.
Allow 100mm to 150mm between the glass and the grille so the window can be cleaned, and plan a housing above the ceiling line. Displays have to work with it, so a shallow window bed in front of the grille can hold items you don't mind leaving out. Many jewellers clear the high-value pieces into a safe at night and use the grille for what remains.
Check that the grille doesn't cross a fire exit route when closed, and that closing it fits the routine of whoever locks up. A grille that is awkward to work tends to stay open.
What happens after a break-in?
Make the premises safe, call the police and your insurer, and photograph everything before it is moved. Boarding usually comes first, through your insurer's helpline or a glazier nearby, as we don't run a rapid repair service. Repairs we do attend are charged call-outs at £165 plus VAT.
After that, treat the damage as a chance to look again. A replacement pane of the same weak glass restores the risk you had, so ask whether the frame can take laminated glass, whether the beads are on the right side and whether the lock was the real failure. Keep a schedule of your pane sizes and make-up, because every piece of glass is made to order.
Common questions
Can laminated glass go into my existing frames?
Often, yes, but check the rebate depth and the weight first. Thicker laminate may need new beads, or a stronger frame on an older front.
Does changing to security glass need planning permission?
Usually not, if the appearance doesn't materially change. A listed building is different, and the council should be asked before any glass comes out.
Will a new shopfront affect my alarm?
Almost certainly, because door contacts and glass sensors are disturbed during the work. Book your alarm engineer to refit them before the job ends, and tell the monitoring company when work starts.
Are stallrisers useful for security?
Yes, a solid stallriser keeps glass off the ground and helps against a low vehicle or a kicked-in pane. It won't stop a determined ram raid by itself, though it adds a real obstacle.