0800 088 6248 Get a guide price
  1. Home
  2. Services
  3. Aluminium shopfronts
  4. Downpatrick

Aluminium shopfronts in Downpatrick

One itemised price and one named contact for Downpatrick premises.

A good aluminium shopfront in Downpatrick should look as if it grew out of the building above it. We set the stallriser, mullions and fascia from the proportions of your elevation, across Downpatrick and the rest of County Down.

A survey in Downpatrick usually starts outside, looking at the whole elevation before any tape comes out, because the frontage has to answer the building above it.

Dark bronze aluminium shopfront with slim frames, a low stallriser and a glazed entrance door

How would we approach aluminium shopfronts for your Downpatrick premises?

A narrow Downpatrick unit gains from fewer parts. Under about 4m wide, we'd offset the door and use one large pane rather than a central door with two slivers of glass either side, which makes the front feel wider than it measures.

If your Downpatrick branch is one stop in a wider rollout, we'd adapt your standard details to this opening instead of forcing the opening to fit them. Section, colour and fixings stay the same as the rest of the estate, while mullion spacing and fascia depth answer to the building.

If your premises were once two shops, decide early whether the front should read as one or as two. One continuous fascia with a repeated bay width usually settles the elevation better than two mismatched halves, which is worth testing on any Downpatrick unit of that kind.

What should you budget for aluminium shopfronts in Downpatrick?

As a working budget, use £2,495 to £11,995 plus VAT for a typical 3 to 7 m frontage. Your place inside that range for aluminium shopfronts depends mostly on how much of the existing frontage can stay and how much has to be put right first.

What consents could affect aluminium shopfronts in Downpatrick?

A true like-for-like replacement usually needs no planning permission in Northern Ireland, since the external appearance isn't materially affected. Altered materials, proportions or sightlines usually do count, so for aluminium shopfronts at premises in the Downpatrick area, planning permission is then likely to be needed. The council confirms where a job sits.

Planning and advert applications for Downpatrick premises normally go to Newry, Mourne and Down District Council. We check the position for your address at survey.

Downpatrick at a glance
TownDownpatrick
AreaCounty Down
Postcode districtsBT30
Planning authorityNewry, Mourne and Down District Council
Building approvalBuilding Control (Technical Booklets)
SurveyFree for new work

Does Newry, Mourne and Down District Council publish shopfront guidance?

Yes, Advice Guide 8 - General Principles of Good Shop Front Design. It tells applicants what the council expects from new and altered shopfronts. A few of the things it asks for:

  • Stall risers should be at least 500mm high, or reach the top of the pilaster base, with a moulded projecting sill below the glazing.
  • Ground-floor fascias should be about 600mm high, and acrylic or fluorescent materials are not acceptable.
  • Surface-mounted shutters will not receive planning permission, and unpainted galvanised shutters will not be permitted.

Read our summary of the Newry, Mourne and Down guidance

Questions about aluminium shopfronts in Downpatrick

Who carries out the work in Downpatrick?

Vetted teams working under S&K Glazing carry it out, with one named contact from survey to handover. The contract is with S&K Glazing Limited, and we travel to Downpatrick from Great Barr.

Can a sign and shutter be fitted with the frame in Downpatrick?

Yes, and it's usually the neater way to do it. One contract covers the frontage, so the shutter box, fascia and sign fixings are drawn together and nobody is left waiting for another trade.

What happens to my old shopfront in Downpatrick?

We strip it out and take it away, and that work appears as its own line on the quotation. If part of the old front is worth keeping, such as a stallriser or decorative ironwork, say so at survey and we'll draw around it.

What building approval does a shopfront in the Downpatrick area need?

Usually a full plans application to Building Control in Northern Ireland, because building notices are for single dwellings. The Technical Booklets set the detail, with Booklet V for glass and Booklet R for access. Only dwelling windows and doors are exempt, so ask Building Control before assuming a like-for-like job falls outside the rules.

Does a shop sign in the Downpatrick area need advertisement consent?

Not always. Under Northern Ireland's 2015 Regulations, an unlit sign within Class 5 generally needs no application, with a 5m top height and 0.3m letters, and neither does a lit sign within Class 4(2). That lit class isn't available in conservation areas, Areas of Outstanding Natural Beauty or National Parks, so ask first.

Planning aluminium shopfronts in Downpatrick?

Send the address and a photo, and we'll come and measure it.

Call usGet a guide price