For automatic sliding doors across Clwyd, we draw first and order later. You see a scale drawing with signed-off dimensions before anything is made, so the frontage on paper is the frontage you get.
Your frontage is read alongside its neighbours, so we note the fascia line, stallriser height and pilasters on either side before drawing automatic sliding doors for Clwyd premises. Matching those lines or breaking them on purpose can both work, whereas doing it by accident never does.

How do we handle automatic sliding doors for premises in Clwyd?
If your premises in Clwyd lose heat each time the door opens, the answer may be in the settings. Shorter hold-open times, a tighter sensor field and a night mode often cost less than new hardware, with an air curtain as the next step.
Servicing should be thought about at the start. For premises in Clwyd, we'd place the operator cover and isolator where an engineer can reach them from a short ladder, with no need to disturb the fascia.
What consents apply to automatic sliding doors in Clwyd?
Section 55 of the Town and Country Planning Act 1990 sets the test in Wales: work that doesn't materially affect the external appearance isn't development. Anything that does needs planning permission, and that goes for automatic sliding doors at premises in the Clwyd area as much as for a full new frontage. The council confirms how the test applies to your site.
How much do automatic sliding doors cost in Clwyd?
The guide for automatic sliding doors is £3,895 to £11,995 plus VAT per entrance. Expect the lower end for simple work with clear access, and the upper end where detail, finish or awkward conditions add hours.
| Area | Clwyd |
|---|---|
| Nation | Wales |
| Towns covered | 14 |
| Main town | Wrexham |
| Planning regime | Wales: TCPA 1990 and the 1992 Advertisement Regulations |
| Building approval | Building Regulations (Approved Documents for Wales) |
| Survey | Free for new work, from our Great Barr base |
Does Denbighshire County Council publish shopfront guidance?
Yes, LDP Supplementary Planning Guidance Note 02: Shop Fronts (2013). It tells applicants what the council expects from new and altered shopfronts. A few of the things it asks for:
- As a rule of thumb the fascia should be no more than one-fifth of the distance from its top down to the pavement.
- Internal lattice grilles or shutters are preferred, and solid external roller shutters are the least preferred option.
- External shutters should be perforated, integrated into the design and suitably coloured.
Questions about automatic sliding doors in Clwyd
Can a door in Clwyd be set up to ignore people walking past?
Yes, in most cases. The sensor field can be narrowed and angled so it reads direction, which cuts false openings on a street-facing door.
Who services automatic doors once they are fitted in Clwyd?
Any competent door engineer can, and we'd recommend two visits a year. We'll talk you through the options at handover, so it doesn't get forgotten.
Do you fit automatic sliding doors across Clwyd?
Yes. We travel from Great Barr to survey the entrance, then fit and set up the door with a vetted team.
Who decides listed building consent for a shopfront in the Clwyd area?
Planning authorities and Welsh Ministers share control of listed building consent in Wales, under the Historic Environment (Wales) Act 2023. Cadw is the national body, and the 1990 Act no longer applies. Ask the council where an application should start.
Does a replacement shopfront in the Clwyd area need Building Regulations approval?
Assume yes until building control says otherwise, because Wales has no like-for-like exemption. Glazing is judged against Approved Document N, as Wales keeps Part N. A registered installer can self-certify replacement windows and doors in non-dwellings, but not structural glass, curtain walling or revolving doors.