Good automatic entrances look calm and quiet, with very little on show. For Cricklewood premises, that means hiding the operator, aligning the leaves and setting the door to your hours.
Please have keys to any meter cupboards and shutter housings to hand when we survey in Cricklewood, because what sits behind them can change the drawing.

How do you design around the building when planning automatic sliding doors in Cricklewood?
If your Cricklewood entrance catches low sun, infrared sensors can misread the light on the floor. We'd favour radar with a presence sensor set for those conditions, and consider solar control glass in the leaves.
In a parade in Cricklewood with a narrow pavement, the sensor set-up is the first job. We'd angle the radar so people walking past don't trigger the door, and keep the leaves in line with the neighbouring frontage.
On a north-facing frontage the glass stays free of glare, but the interior can look dim from the street, so lighting needs to sit closer to the window. If your Cricklewood premises face south, the problem flips to reflections by day and fading stock.
What permissions should you check for automatic sliding doors in Cricklewood?
Security grilles and shutters are named in England's rules: installing or replacing one on a shopfront sits outside the shop permitted development rights. The frontage itself is treated the same way, so for automatic sliding doors at premises in the Cricklewood area, building work that materially affects the appearance needs planning permission. Confirm the position with the council before anything is ordered.
Planning and advert applications for Cricklewood premises normally go to London Borough of Barnet. We check the position for your address at survey.
What might automatic sliding doors cost in Cricklewood?
A sensible starting budget is £3,895 to £11,995 plus VAT per entrance. What shifts the figure is whatever can't be seen yet, such as the condition behind the old frontage or the services running through it.
| Town | Cricklewood |
|---|---|
| Area | Greater London |
| Postcode districts | NW10, NW11, NW2, NW6 |
| Planning authority | London Borough of Barnet |
| Building approval | Building Regulations (Approved Documents) |
| Distance from Great Barr | About 99 miles |
| Survey | Free for new work |
Questions about automatic sliding doors in Cricklewood
Can an automatic door work with my Cricklewood shop's alarm and locks?
Yes. The door can lock at closing, and it can link to your alarm or access control where the systems allow, with a manual key position as a fallback.
How noisy would an automatic door be at my Cricklewood shop?
A healthy door is very quiet, and you'd normally hear only a soft hum. Noise usually means worn rollers or grit in the guide, which a service will put right.
Can you match the door to my existing front in Greater London?
Yes. Frames come in any RAL colour, and we'd line up the leaves with your existing mullions so the door doesn't look like an add-on.
What rules apply to a fire exit door through a shopfront in the Cricklewood area?
It must open in the direction of escape and can't be locked against immediate use, and a dedicated fire exit can't be a sliding or revolving door. In England that comes from article 14(2) of the Regulatory Reform (Fire Safety) Order 2005, and the duty sits with the responsible person, normally the employer or whoever controls the premises for a business, otherwise the owner. An outward door can clash with section 153 of the Highways Act 1980 where it opens onto the footway, so raise it early.
Does a new shopfront in the Cricklewood area need Building Regulations approval?
Assume yes until building control says otherwise. England has no like-for-like exemption, though registered installers can self-certify replacement windows and doors in non-dwellings. That route doesn't cover structural glass, curtain walling or revolving doors.