A bi-fold for Cricklewood premises is one job under one contract, covering the panels, threshold and any new steel. Your named contact handles it, and we travel from Great Barr.
We measure your Cricklewood opening in person, at a time agreed with you first, so the visit fits around your trading.

What makes bi-folding shopfronts work well on Cricklewood premises?
On a narrow Cricklewood unit, the stack can swallow the opening. We'd limit the set to three panels, or look at a single sliding leaf, so the opening you gain outweighs the width lost to parked frames.
For a restaurant group opening in Cricklewood, a bi-fold can carry the brand's look from site to site. We'd standardise the panel section, colour and hardware, then vary the panel count and stack side to suit each opening.
If your Cricklewood unit sits in a Victorian parade, the old pilasters usually set the rhythm, so a new front should land on them and not run past them. Keep that line and even a modern frame looks as though it belongs.
Could bi-folding shopfronts in Cricklewood need planning permission?
Security grilles and shutters are named in England's rules: installing or replacing one on a shopfront sits outside the shop permitted development rights. The frontage itself is treated the same way, so for bi-folding shopfronts at premises in the Cricklewood area, building work that materially affects the appearance needs planning permission. Confirm the position with the council before anything is ordered.
Expect planning and advert applications here to go to London Borough of Barnet in the normal way. We check what that means for your building when we survey it in Cricklewood.
How much should you set aside for bi-folding shopfronts in Cricklewood?
We would budget £5,195 to £13,995 plus VAT for a typical opening. Scope sets most of the figure, so a clear brief at the start does more for the budget than any later change of detail.
| Town | Cricklewood |
|---|---|
| Area | Greater London |
| Postcode districts | NW10, NW11, NW2, NW6 |
| Planning authority | London Borough of Barnet |
| Building approval | Building Regulations (Approved Documents) |
| Distance from Great Barr | About 99 miles |
| Survey | Free for new work |
Questions about bi-folding shopfronts in Cricklewood
Can I have a timber bi-fold on my Cricklewood frontage?
Yes. Painted hardwood sets suit older premises across Greater London, though the panels are heavier and need a stiffer head than aluminium.
Can the threshold be level at my Cricklewood premises?
It can be close to level, depending on the floor and drainage. We'd check the levels at survey, because a track sitting flush with the pavement still needs somewhere for water to go.
Can my Cricklewood bi-fold be fitted around service?
Yes. Closed-day or out-of-hours fitting can be arranged to avoid your busiest sittings, and the job typically takes 2 to 4 days on site.
What rules apply to a fire exit door through a shopfront in the Cricklewood area?
It must open in the direction of escape and can't be locked against immediate use, and a dedicated fire exit can't be a sliding or revolving door. In England that comes from article 14(2) of the Regulatory Reform (Fire Safety) Order 2005, and the duty sits with the responsible person, normally the employer or whoever controls the premises for a business, otherwise the owner. An outward door can clash with section 153 of the Highways Act 1980 where it opens onto the footway, so raise it early.
Do I need listed building consent for a shopfront in the Cricklewood area?
Usually yes, if the building is listed. In England the local planning authority decides, and Historic England is notified of Grade I and II* works and specified Grade II works. Like-for-like repair may not need consent, so ask the council before work starts.