Refurbishment is a design job as much as a repair job. Small changes to colour, fascia depth and lighting can lift frontages in Cricklewood far more than their cost suggests.
Expect us to measure the opening, photograph the existing front and check how materials will reach it on the day, at a time you have agreed.

Where should you begin with shopfront refurbishment in Cricklewood?
Where budget is the limit, we rank the work by what people see first. The fascia, the door and the lower part of the frontage usually matter most, and the rest can follow as a second stage.
Where the sign is the first thing that looks tired, we would start there and work down. A slimmer fascia and better letters can carry a modest frame very well.
Where the building has good brick or stone around the opening, set the frame back in the reveal so the masonry can be seen. On Cricklewood premises with a flat elevation, that deep reveal throws a shadow line that adds real depth in low sun.
What sign-off might you need for shopfront refurbishment in Cricklewood?
England has no permitted development route for changing a shopfront. Part 7 Class A of the General Permitted Development Order 2015 excludes creating, altering or replacing one, and it allows no alterations at all on article 2(3) land. That leaves two outcomes for shopfront refurbishment at premises in the Cricklewood area: a planning application, or work that doesn't materially affect the external appearance.
For Cricklewood, the usual route for planning and advert applications is through London Borough of Barnet, and we confirm that when we visit.
What price should you expect for shopfront refurbishment in Cricklewood?
We would budget £1,995 to £8,995 plus VAT depending on what is kept. Scope sets most of the figure, so a clear brief at the start does more for the budget than any later change of detail.
| Town | Cricklewood |
|---|---|
| Area | Greater London |
| Postcode districts | NW10, NW11, NW2, NW6 |
| Planning authority | London Borough of Barnet |
| Building approval | Building Regulations (Approved Documents) |
| Distance from Great Barr | About 99 miles |
| Survey | Free for new work |
Questions about shopfront refurbishment in Cricklewood
Is it worth refurbishing an old aluminium shopfront in Cricklewood?
Often, yes, if the frame is straight and the corners are tight. Recoating, new gaskets and better glass can add years of life. If the frame is corroded or the door has worn out its fixings, replacement may make more sense.
How do I know if my Cricklewood shopfront needs replacing?
A measured survey will show you. We check the frame, joints, door and glass, then tell you plainly whether refurbishment will last or whether a new shopfront would be better value.
Can a refurbishment make my Cricklewood premises easier to enter?
Often, yes. Lighter door closers, better handles and a lower threshold can all be added without replacing the frontage. We check the door width and the step at survey.
Do roller shutters need planning permission in the Cricklewood area?
Usually yes. Installing or replacing a security grill or shutter on a shopfront is expressly outside England's shop permitted development rights, so the only way to avoid an application is work that doesn't materially affect the appearance. Ask the council before ordering.
Does a new shopfront in the Cricklewood area need Building Regulations approval?
Assume yes until building control says otherwise. England has no like-for-like exemption, though registered installers can self-certify replacement windows and doors in non-dwellings. That route doesn't cover structural glass, curtain walling or revolving doors.