A bi-folding front lets a restaurant, bar or showroom in Dalgety Bay open fully to the street when the weather allows. We draw the panels, stack and threshold to your opening, so it closes up tight when the weather doesn't.
Expect us to measure the opening, photograph the existing front and check how materials will reach it on the day, at a time you have agreed.

What goes into getting bi-folding shopfronts right in Dalgety Bay?
Bi-folds suit a two-stage fit at Dalgety Bay premises that trade late. We'd take the old front out and fix the frame during closed hours, then hang and adjust the panels the following night, with temporary boarding in between.
For a restaurant group opening in Dalgety Bay, a bi-fold can carry the brand's look from site to site. We'd standardise the panel section, colour and hardware, then vary the panel count and stack side to suit each opening.
A corner unit has two fronts to think about, and the return elevation often does as much selling as the main one. If that is your layout in Dalgety Bay, carry the fascia and glass line round the corner and treat both faces as one composition.
Which applications might bi-folding shopfronts in Dalgety Bay involve?
Section 26 of the Town and Country Planning (Scotland) Act 1997 sets the test: work that doesn't materially affect the external appearance isn't development. For bi-folding shopfronts at premises in the Dalgety Bay area, anything that does needs planning permission, and a true like-for-like replacement usually doesn't. The council confirms how that applies to each site.
For Dalgety Bay, the usual route for planning and advert applications is through Fife Council, and we confirm that when we visit.
How much could bi-folding shopfronts in Dalgety Bay cost you?
We would budget £5,195 to £13,995 plus VAT for a typical opening. Scope sets most of the figure, so a clear brief at the start does more for the budget than any later change of detail.
| Town | Dalgety Bay |
|---|---|
| Area | Fife |
| Postcode districts | EH30, KY11 |
| Planning authority | Fife Council |
| Building approval | Building warrant (Technical Handbook) |
| Distance from Great Barr | About 248 miles |
| Survey | Free for new work |
Does Fife Council publish shopfront guidance?
Yes, Shop Front Design Guidelines (2016). It tells applicants what the council expects from new and altered shopfronts. A few of the things it asks for:
- Solid security shutters are discouraged, and shutter boxes may not project in front of the shop front.
- Internal lattice shutters and reinforced laminated glass are encouraged in town centres, with demountable mesh grilles preferred on traditional shop fronts.
- Each shop normally gets one fascia sign and one projecting sign, and only one of them may be lit.
Questions about bi-folding shopfronts in Dalgety Bay
Will I lose a table to the stack in my Dalgety Bay restaurant?
Possibly one, but careful layout usually avoids it. We draw the folded panels on your floor plan, then look at moving the stack to a quieter corner or splitting the set in two.
Can my Dalgety Bay bi-fold be fitted around service?
Yes. Closed-day or out-of-hours fitting can be arranged to avoid your busiest sittings, and the job typically takes 2 to 4 days on site.
Can I have a timber bi-fold on my Dalgety Bay frontage?
Yes. Painted hardwood sets suit older premises across Fife, though the panels are heavier and need a stiffer head than aluminium.
Do I need planning permission to alter a shopfront in the Dalgety Bay area?
Usually yes, if the work materially affects the external appearance. Class 9A, Scotland's shop permitted development right, doesn't cover work that alters or extends beyond the existing front. A true like-for-like replacement usually needs no permission, and the council confirms the position.
Does a shop sign in the Dalgety Bay area need advertisement consent?
Not always. Scotland's 1984 Regulations let an unlit sign within Class IV(1) go up without an application, and Class VI does the same for a lit sign with each character lit from within. Class VI isn't available in conservation areas, and one council says lit signs always need express consent, so ask first.