A double-height entrance in Aberdare deserves more than a stretched shopfront. Deeper aluminium sections carry the span, with sightlines kept as slim as the wind load allows.
Please have keys to any meter cupboards and shutter housings to hand when we survey in Aberdare, because what sits behind them can change the drawing.

How do you design around the building when planning curtain walling in Aberdare?
If the ground floor of your Aberdare premises is a shop, we carry the curtain wall grid down into the shopfront below. Door heads, fascia line and transoms then line up by design.
If the frontage joins a neighbouring building in Aberdare, we draw that junction in full at design stage. The last mullion, the flashing and the movement joint are details people notice from the pavement.
If your Aberdare unit sits in a Victorian parade, the old pilasters usually set the rhythm, so a new front should land on them and not run past them. Keep that line and even a modern frame looks as though it belongs.
What permissions should you check for curtain walling in Aberdare?
Section 55 of the Town and Country Planning Act 1990 sets the test in Wales: work that doesn't materially affect the external appearance isn't development. Anything that does needs planning permission, and that goes for curtain walling at premises in the Aberdare area as much as for a full new frontage. The council confirms how the test applies to your site.
Planning and advert applications for Aberdare premises normally go to Rhondda Cynon Taf County Borough Council. We check the position for your address at survey.
What might curtain walling cost in Aberdare?
A sensible starting budget is £550 to £1,250 plus VAT per m². What shifts the figure is whatever can't be seen yet, such as the condition behind the old frontage or the services running through it.
| Town | Aberdare |
|---|---|
| Area | Mid Glamorgan |
| Postcode districts | CF44 |
| Planning authority | Rhondda Cynon Taf County Borough Council |
| Building approval | Building Regulations (Approved Documents for Wales) |
| Distance from Great Barr | About 87 miles |
| Survey | Free for new work |
Does Rhondda Cynon Taf County Borough Council publish shopfront guidance?
Yes, Shopfront Design. It tells applicants what the council expects from new and altered shopfronts. A few of the things it asks for:
- External roller shutters are a last resort after other security options are shown to be unsuitable.
- Solid metal shutters are unlikely to be acceptable, while lattice or brick-bond grille shutters may be considered.
- Individual shutters covering only the glazing are one option, and powder coating is generally preferred to paint.
Questions about curtain walling in Aberdare
Can you replace failing curtain walling on premises in Aberdare?
Yes. We survey the frame, brackets and seals first, because some elevations only need new glass and gaskets. If the frame itself has failed, we draw a replacement that can be phased around the building's use.
Can you match the frames already on my Aberdare building?
Usually, yes. Colour can be matched to a RAL reference or a sample, and cap profiles can be chosen to sit close to what is there. An exact match on an old system may not be possible, in which case we would suggest a deliberate change at a natural break.
Will you coordinate with my architect or main contractor in Aberdare?
Yes. We can work to their drawings and programme, and we supply shop drawings for their review before anything is made. Your named contact stays the single route for questions on our package.
Is planning permission needed for a new shopfront in the Aberdare area?
Usually yes, if the work materially affects the external appearance, because Wales has no permitted development route for changing a shopfront. Most of the Planning (Wales) Act 2026 hasn't been commenced yet, so the existing rules apply. A true like-for-like replacement usually avoids an application, and the council confirms the position.
When does a shop sign in the Aberdare area need advertisement consent?
A sign needs advertisement consent when it falls outside Class 5 or Class 4B of the 1992 Advertisement Regulations, which still apply in Wales. Within Class 5, an unlit sign sits on a wall containing a shop window and tops out at 4.6m or the first-floor sill if lower. A lit sign in a conservation area needs consent, because Class 4B isn't available there.