A slim framed slider can sit inside an existing Aberdare frontage with little change to the outside. The drive hides behind the fascia, and the leaves line up with the screens either side.
Measuring the opening is the easy part of a survey in Aberdare. We also look at the beam above, the pavement fall and any meters or drains nearby.

What makes automatic sliding doors work well on Aberdare premises?
Automatic doors suit a night fit in Aberdare, because most of the work is at the head and the opening stays usable in stages. We'd fit the track and leaves out of hours, then commission the door before you open.
A deep recess is a gift for an automatic door. At Aberdare premises with one, we'd set the door back from the street so the sensors see less of the pavement and the leaves get some shelter from the wind.
If your Aberdare unit is narrow, a central door can split a small window into two weak ones. Moving the door to one side gives you a single confident pane, provided the layout inside still works.
Could automatic sliding doors in Aberdare need planning permission?
Section 55 of the Town and Country Planning Act 1990 sets the test in Wales: work that doesn't materially affect the external appearance isn't development. Anything that does needs planning permission, and that goes for automatic sliding doors at premises in the Aberdare area as much as for a full new frontage. The council confirms how the test applies to your site.
Aberdare applications for planning permission or advertisement consent are normally handled by Rhondda Cynon Taf County Borough Council. Our survey includes a check of the position for your address.
How much should you set aside for automatic sliding doors in Aberdare?
Our guide band is £3,895 to £11,995 plus VAT per entrance. Scope is the biggest lever, so a tighter brief for automatic sliding doors brings the figure down faster than any change of detail.
| Town | Aberdare |
|---|---|
| Area | Mid Glamorgan |
| Postcode districts | CF44 |
| Planning authority | Rhondda Cynon Taf County Borough Council |
| Building approval | Building Regulations (Approved Documents for Wales) |
| Distance from Great Barr | About 87 miles |
| Survey | Free for new work |
Does Rhondda Cynon Taf County Borough Council publish shopfront guidance?
Yes, Shopfront Design. It tells applicants what the council expects from new and altered shopfronts. A few of the things it asks for:
- External roller shutters are a last resort after other security options are shown to be unsuitable.
- Solid metal shutters are unlikely to be acceptable, while lattice or brick-bond grille shutters may be considered.
- Individual shutters covering only the glazing are one option, and powder coating is generally preferred to paint.
Questions about automatic sliding doors in Aberdare
Can you match the door to my existing front in Mid Glamorgan?
Yes. Frames come in any RAL colour, and we'd line up the leaves with your existing mullions so the door doesn't look like an add-on.
What do I need to arrange for a door in Aberdare?
Usually just a power supply near the head, and we'll tell you exactly what at survey. We can bring that into the one contract if you'd rather not chase an electrician.
Who installs automatic doors in Aberdare?
Vetted door teams working under S&K Glazing handle the fit and set-up, travelling from Great Barr. Your agreement is with S&K Glazing Limited, and one person stays your point of call.
Who decides listed building consent for a shopfront in the Aberdare area?
Planning authorities and Welsh Ministers share control of listed building consent in Wales, under the Historic Environment (Wales) Act 2023. Cadw is the national body, and the 1990 Act no longer applies. Ask the council where an application should start.
When does a shop sign in the Aberdare area need advertisement consent?
A sign needs advertisement consent when it falls outside Class 5 or Class 4B of the 1992 Advertisement Regulations, which still apply in Wales. Within Class 5, an unlit sign sits on a wall containing a shop window and tops out at 4.6m or the first-floor sill if lower. A lit sign in a conservation area needs consent, because Class 4B isn't available there.